Read LG SW8D1 Service Manual online
-14-
4-11. VENT REPLACEMENT
(1) Open the spin dryer cover and the safety cover-2
and pull off the safety cover-1
(2) If the vent is pulled upward, it can be removed.
(fig. 44)
(fig. 44)
5. ADJUSTMENT
5-1. BELT TENSION
Adjust the belt tension by adjusting 2 bolts for the wash
motor that the length “ ” be 90~100mm. when you
grasp it with your fingers.
grasp it with your fingers.
Fig.44
To assemble the vent, reverse the disassembly
procrdure.
procrdure.
If the vent is not inserted correctly, water will flow back
into the spin tub, and a normal spin is impossible.
into the spin tub, and a normal spin is impossible.
NOTE
5-2. DOOR SWITCH OPERATION
Adjust the door switch by bending the contact so it
turns on/off when the spin dryer cover is raised 5 to 20
degree in a hirizontal position.
turns on/off when the spin dryer cover is raised 5 to 20
degree in a hirizontal position.
Motor pulley
Pulsator pulley
5 ~20
Vent
WP 830
29/8/04, 10:51 PM
14
Click on the first or last page to see other SW8D1 service manuals if exist.