Read LG SW8D1 Service Manual online
-10-
4-6. SPIN MOTOR ASSEMBLY
REPLACEMENT
REPLACEMENT
After removing the spin dryer basket assembly, refer to
the figure and proceed as follows :
the figure and proceed as follows :
(1) Pull out the brake wire assembly from the brake
wire supporter and also take it out from the brake
assembly. (fig.24)
wire supporter and also take it out from the brake
assembly. (fig.24)
(6) Unscrew and remove the screws fastening the
motor supporter. (fig. 27)
Fig.24
(2) Disconnect the lead wires of the spin motor.
(3) Lay the washing machine on its front side on a
(3) Lay the washing machine on its front side on a
blanket or cardboard.
(4) Hold the spin motor and unscrew and remove the
screws from the base. (fig.25)
Fig.25
(5) Keep placing the brake spring portion lower, and
remove the spin motor. (fig.26)
Fig.26
(Fig.27)
(7) Loosen the bolts of the coupling assembly
fastening the motor shaft and pull up the coupling
assembly from the motor shaft. (fig. 28)
assembly from the motor shaft. (fig. 28)
Fig.28
(8) Unscrew and remove the screws fastening the
brake assembly and remove the brake assembly
from the spin motor. (fig.29)
from the spin motor. (fig.29)
Fig.29
To assemble the spin motor assembly to the base,
reverse the above disassembly procedure.
reverse the above disassembly procedure.
WP 830
29/8/04, 10:51 PM
10
Click on the first or last page to see other SW8D1 service manuals if exist.