Read JBL GTO 14001 (serv.man3) EMC - CB Certificate online
EN 60065
Clause
Requirement – Test
Result - Remark
Verdict
____________________________________________________________________________________________________________
Holytech (HK) Certification Co., Limited
Flat/Rm 1001 10/F Taiyau Building 181 Johnston Road Wanchai
Tel : 00852-36458129 FAX : 00852-36458092
Holytech (HK) Certification Co., Limited
Flat/Rm 1001 10/F Taiyau Building 181 Johnston Road Wanchai
Tel : 00852-36458129 FAX : 00852-36458092
Report No.:
HL-S07062713
Page 11 of 28
11.2.4
Temperature rise of parts acting as a support or
mechanical barrier
mechanical barrier
P
11.2.5
Temperature rise of windings
(see appended table)
P
11.2.6
Temperature rise of parts not subject to the limits of
11.2.1 to 11.2.5
11.2.1 to 11.2.5
No excessive temperature
observed /measured on
other parts (see appended
table).
observed /measured on
other parts (see appended
table).
P
12 MECHANICAL
STRENGTH
–
12.1.1
Bump test where mass >7 kg
Mass less than 7Kg
N
12.1.2 Vibration
test
No hazardous after
vibration test
vibration test
P
12.1.3
Impact hammer test
No damage in the sense of
this standard
this standard
P
Steel ball test
No damage in the sense of
this standard
this standard
P
12.1.4
Drop test for portable apparatus where mass < 7 kg
N
12.1.5
Thermoplastic enclosures strain relief test
Metal enclosure
N
12.2
Fixing of knobs, push buttons, keys and levers
No damage in the sense of
this standard
this standard
P
12.3
Remote controls with hazardous live parts
No hazardous live parts.
P
12.4
Drawers (pull test 50 N, 10 s)
No drawers.
N
12.5
Antenna coaxial sockets providing isolation
No damage in the sense of
this standard
this standard
N
12.6
Telescoping or rod antennas construction
No telescoping or rod
antennas
antennas
N
12.6.1
Telescoping or rod antennas securement
N
13
CLEARANCE AND CREEPAGE DISTANCES
–
13.1
Clearances in accordance with 13.3
See 13.3
–
Creepage distances in accordance with 13.4
See 13.4
–
13.2
Determination of operating voltage
N
13.3 Clearances
N
13.3.1 General
N
13.3.2
Circuits conductively connected to the mains comply
with table 8 and, where applicable, table 9
with table 8 and, where applicable, table 9
N
13.3.3
Circuits not conductively connected to the mains
comply with table 10
comply with table 10
No hazardous secondary
N
Click on the first or last page to see other GTO 14001 (serv.man3) service manuals if exist.