ON STAGE 200ID - JBL Audio EMC - CB Certificate (repair manual). Page 89

Read JBL ON STAGE 200ID EMC - CB Certificate online

IEC 60950-1 (ed.1) 
 
- Page 2 of 2 - 
 
 
www.nemko.com 
Report No.   98323 
 
 
No 
Item  
Requirement 
Result - Remark 
Verdict
Detachable power 
cord set (consists 
of mains plug, 
mains cord and 
appliance 
connector 
Detachable power cord set must be 
listed in the test report critical 
component list. 
Class III equipment. 
Circuit diagrams 
Circuit diagrams must be indicated 
with component’s values for 
products tested to IEC 60065 and 
IEC 60950. 
Class III equipment. 
10 
Circuit diagrams of 
electronic modules 
in electrical 
appliances 
Circuit diagrams of the electronic 
modules in the electrical appliances 
must be provided. 
No electronic 
modules. 
11 
Controlled goods 
likely to be treated 
as toy by children 
Controlled goods, having an 
enclosure, which is shaped and 
decorated so that it is likely to be 
treated as a toy by children, shall 
not be accepted for certification and 
registration. 
The equipment is 
not treated as toy 
by children. 
Applicable to AC adaptor 
13 
3-pin AC adaptor 
Test report showing that the 3-pin 
complied with sub-clauses 12.1 & 
12.3 of SS 246 must be submitted. 
Class III equipment. 
14 
2-pin 
AC 
adaptor 
The 2-pin (Appendix W) shall 
comply with IEC 83: 1975 (Standard 
C5, Version II) or EN 50075 
Class III equipment. 
15 
Detachable power 
supply cord set not 
supplied by 
Registered 
Supplier 
Registered Supplier who is not 
supplying the detachable power 
supply cord set together with the AC 
Adaptor must provide written 
instruction to its customer on the 
type of approved detachable power 
cord set to use. 
Class III equipment. 
Applicable to computer products 
16 
CD/DVD ROM 
(used in personal 
computer) 
Test certificate showing that 
CD/DVD ROM has complied with 
IEC 825 must be provided. 
The equipment 
does not consist of 
CD/DVD ROM. 
17 
Modem Card (used 
in personal 
computer) 
Modem card incorporated in the 
personal computer must be tested 
at set level (sub-clauses 5.1 & 6 of 
IEC 60950) or at component level. 
The equipment 
does not consist of 
Modem Card. 
Page of 103
Display

Click on the first or last page to see other ON STAGE 200ID service manuals if exist.