Read JBL DUET 200 (serv.man3) EMC - CB Certificate online
- Page 18 of 62 -
Report
No. 111798
IEC 60950-1:2005 / EN 60950-1:2006
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IECEN60950_1C
Electric strength test
⎯
2.10.5.11 Insulation in wound components
Not used.
N
2.10.5.12 Wire in wound components
No TIW
N
Working
voltage ....................................................: N
a) Basic insulation not under stress ......................:
N
b) Basic, supplemetary, reinforced insulation .......:
N
c) Compliance with Annex U .................................:
N
Two wires in contact inside wound component;
angle between 45
angle between 45
° and 90° ...................................:
N
2.10.5.13 Wire with solvent-based enamel in wound
components
No wire with solvent-based
enamel in wound components.
enamel in wound components.
N
Electric strength test
(see appended table 2.10.5)
⎯
Routine test
N
2.10.5.14 Additional insulation in wound components
No additional insulation used
N
Working
voltage ....................................................:
N
- Basic insulation not under stress ........................:
N
- Supplemetary, reinforced insulation ...................:
N
2.10.6
Construction of printed boards
No special construction on
printed boards.
printed boards.
⎯
2.10.6.1
Uncoated printed boards
N
2.10.6.2
Coated printed boards
N
2.10.6.3
Insulation between conductors on the same inner
surface of a printed board
surface of a printed board
N
2.10.6.4
Insulation between conductors on different layers of
a printed board
a printed board
N
Distance through insulation
N
Number of insulation layers (pcs) ..........................:
N
2.10.7
Component external terminations
Coatings not used over
terminations to increase
effective creepage and
clearance distances.
terminations to increase
effective creepage and
clearance distances.
N
2.10.8
Tests on coated printed boards and coated
components
components
No special coating in order to
reduce distance.
reduce distance.
N
2.10.8.1
Sample preparation and preliminary inspection
N
Click on the first or last page to see other DUET 200 (serv.man3) service manuals if exist.