Read Harman Kardon DRIVE AND PLAY (serv.man16) User Guide / Operation Manual online
INSTALLATION
Parts List
Drive + Play includes the following components and parts:
•
Text Display With Universal Mounting Base and Attached
Cable (3m)
Cable (3m)
•
Control Knob With 30° Mounting Base and Attached
Cable (3m)
Cable (3m)
•
Electronics Enclosure (the Brain)
•
Wired FM Adaptor With Attached Cables
•
12-Volt Accessory Power Cable (2m) With Cigarette
Lighter Adaptor
Lighter Adaptor
•
12-Volt Power Harness (0.5m) With In-Line Fuse Holder (for
direct connection to the vehicle’s electrical system)
direct connection to the vehicle’s electrical system)
•
Line Out Cable (1.6m): Stereo 3.5mm (M) Plug to L/R RCA
(M) Plugs
(M) Plugs
•
iPod Cable (3m): 8-Pin Mini DIN (M) Plug to iPod Dock
Connector
Connector
•
(2) Control Knob Bases: 0° and 60°
•
(2) Mounting Plates for Knob Base and Display Base
•
(10) Mounting Screws: (3) Knob Base, (3) Display Base and
(4) Electronics Enclosure
(4) Electronics Enclosure
•
(6) Cable Ties, Black
•
(2) Hex Keys: 3mm and 1.5mm
•
(2) Adhesive Mounting Pads
•
(2) Alcohol Prep Pads
Tools and Precautions
To install Drive + Play components, we recommend using the
following tools:
following tools:
•
Electric or cordless drill with drill bit set
• Phillips screwdriver set
• Pencil
• Protective eyewear
Before starting the installation, please observe the following
precautions:
precautions:
• Turn off all audio system power, including the iPod, before
making any connections.
• Always wear protective eyewear when using tools.
Choosing Installation Locations
IMPORTANT: Drive + Play should be installed according to
these instructions and relevant regulations. No part of
this system should obstruct the driver’s view of the road
or vehicle controls or information displays necessary for
safely operating the vehicle. The text display should be
positioned to eliminate glare and reflections, and should
be as close as possible to the driver’s normal line of sight.
these instructions and relevant regulations. No part of
this system should obstruct the driver’s view of the road
or vehicle controls or information displays necessary for
safely operating the vehicle. The text display should be
positioned to eliminate glare and reflections, and should
be as close as possible to the driver’s normal line of sight.
Drive + Play Components
Drive + Play consists of three main components: Text Display,
Control Knob and Electronics Enclosure. They operate toget-
her as a system to make controlling your iPod easy, and to
route the audio signal to your mobile audio system. All three
components must be installed. You can choose wired FM
transmission or direct connection of the line-output audio
signal for the audio interface.
Control Knob and Electronics Enclosure. They operate toget-
her as a system to make controlling your iPod easy, and to
route the audio signal to your mobile audio system. All three
components must be installed. You can choose wired FM
transmission or direct connection of the line-output audio
signal for the audio interface.
Text Display Location
The Text Display shows current iPod information and is similar
to the display on your iPod. It comes with a three-position
pivot arm for virtually limitless viewing adjustment. You can
install the unit in a variety of locations, as long as the
proposed site offers a direct view of the display. For easiest
viewing, mount the unit near other instrument-panel gauges
or on top of the dashboard.
to the display on your iPod. It comes with a three-position
pivot arm for virtually limitless viewing adjustment. You can
install the unit in a variety of locations, as long as the
proposed site offers a direct view of the display. For easiest
viewing, mount the unit near other instrument-panel gauges
or on top of the dashboard.
Control Knob Location
The Control Knob allows you to control the iPod much like the
iPod Click Wheel. The unit comes with three interchangeable
bases so you can choose the most comfortable operation
angle. Ideally, you should install the Control Knob in a location
that provides comfortable access while driving where you can
easily feel and operate it without taking your eyes off the road.
iPod Click Wheel. The unit comes with three interchangeable
bases so you can choose the most comfortable operation
angle. Ideally, you should install the Control Knob in a location
that provides comfortable access while driving where you can
easily feel and operate it without taking your eyes off the road.
INSTALLATION 3
INSTALLATION
ENGLISH
Install Text Display
Install Control Knob
Install
Electronics
Enclosure
(on windshield
glass)
glass)
(on dash)
(on dash)
(on console)
(under
seat)
(behind
radio)
(in glove
box)
box)
Click on the first or last page to see other DRIVE AND PLAY (serv.man16) service manuals if exist.