Read Harman Kardon TU 940 (serv.man4) User Guide / Operation Manual online
11
ENGLISH
AUTOMATIC SCAN OF PRESET
STATIONS
STATIONS
To automatically scan through the
preset stations, follow these steps:
1. Press P.SET SCAN
preset stations, follow these steps:
1. Press P.SET SCAN
9.
2. The tuner will automatically scan the
preset memory, playing each station
for approximately five seconds.
for approximately five seconds.
3. After playing each station, the tuner will
scan for the next preset location where
a station has been programmed.
Memory locations where there is no
station will automatically be skipped.
a station has been programmed.
Memory locations where there is no
station will automatically be skipped.
4. When the desired preset station has
been tuned, press P.SET SCAN
9 to
stop the scan.
PRESET MEMORY
INFORMATION
INFORMATION
A. A preset station may only be removed
from the memory by programming
another station in the same numeric
location.
another station in the same numeric
location.
B. The TU940 has a back-up system
that stores all information in the
preset memory for up to four weeks
in the event there is a power loss. If
the unit is unplugged from an AC
power source for more than four
weeks, all stations must be
reprogrammed.
preset memory for up to four weeks
in the event there is a power loss. If
the unit is unplugged from an AC
power source for more than four
weeks, all stations must be
reprogrammed.
Click on the first or last page to see other TU 940 (serv.man4) service manuals if exist.