SB 30 (serv.man3) - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 7

Read Harman Kardon SB 30 (serv.man3) EMC - CB Certificate online

 
Page 6 of 52 
Report No. : 12-1330-0135 
IEC/EN 60065 
Clause 
Requirement 
– Test 
Result - Remark 
Verdict 
 
 
 
GENERAL REQUIREMENTS 
 
 
Safety class of the apparatus  ................................. :  Class II apparatus. 
Pass 
 
 
 
GENERAL CONDITIONS OF TESTS 
 
4.1.4 
Ventilation instructions require the use of the test 
box 
Temperature measurements were 
carried out in the open-fronted 
wooden box in the standard. 
Pass 
 
 
 
MARKING 
 
 
Comprehensible and easily discernible 
Compliance is checked by 
inspection and by rubbing the 
marking by hand for 15s with a 
piece of cloth soaked with water 
and, at a different place or on a 
second sample, for 15s with a 
piece of cloth soaked with 
petroleum spirit. After this the 
marking shall be legible, it shall 
not be easily possible to remove 
marking plates and they shall 
show to curling. 
Pass 
 
Permanent durability against water and petroleum 
spirit 
After rubbing test by water and 
petroleum spirit, the label still 
easily discernible, indelible and 
legible. 
Pass 
5.1  
a), b) 
Identification, maker, model  ................................... : 
Trademark: 
 
Model: (1)SB 30 CNTR, (2)SB 
30 SUB, (3)SB 30 SUB/230 
Pass 
c) 
Class II symbol if applicable 
Symbol 60417-5172 marked in 
the label. 
Pass 
d), e) 
Rated supply voltage and symbol ........................... :  (1)100-120 V~, 220-240 V~ 
(2)100-120 V~ 
(3)220-240 V~ 
Pass 
f) 
Frequency if safety dependant 
(1)50/60Hz, 50Hz 
(2)50/60 Hz 
(3)50/60 Hz 
Pass 
g), h), i) 
Rated current or power consumption  ..................... :  (1)  4A,  2A  
(2) 100W 
(3) 100W 
Pass 
5.2  
a) 
Earth terminal 
Class II apparatus. 
N/A 
b) 
Hazardous live terminals 
No hazardous live parts. 
N/A 
c) 
Supply output terminals (other than mains) 
No socket outlet for providing 
power to other apparatus. 
N/A 
5.3 
Use of triangle with exclamation mark 
Symbol according to ISO 
7000-0434 in circuit diagram. 
Pass 
Page of 76
Display

Click on the first or last page to see other SB 30 (serv.man3) service manuals if exist.