Read Harman Kardon SB 26 (serv.man3) EMC - CB Certificate online
Page 8 of 40
Report No.: ACSCBAV13004
IEC 60065
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065K
5.4
Instructions for use
English
(Version in other language will
be provided when submitted
for national approval)
(Version in other language will
be provided when submitted
for national approval)
Pass
5.4.1
a) Mains powered equipment not exposed to
dripping or splashing. Warning concerning objects
filled with liquid, etc.
dripping or splashing. Warning concerning objects
filled with liquid, etc.
Stated in user manual.
Pass
b) Hazardous live terminals, instructions for wiring
No live terminals.
N/A
c) Instructions for replacing lithium battery
No lithium battery.
N/A
d) Class I earth connection warning
N/A
e) Instructions for multimedia system connection
N/A
f) Special stability warning for attachment of the
apparatus to the floor/wall
apparatus to the floor/wall
N/A
g) Warning: battery exposure to heat
Stated in user manual.
Pass
h) Warning: protective film on CRT face
No CRT provided.
N/A
5.4.2
a-b) Disconnect device: plug/coupler or all-pole
mains switch location, accessibility and markings
mains switch location, accessibility and markings
Stated in user manual.
Pass
c) Instructions for permanently connected equipment
N/A
Marking, signal lamps or similar for completely
disconnection from the mains
disconnection from the mains
N/A
6 Hazardous
radiation
-
6.1
Ionizing radiation < 36 pA/kg (0,5 mR/h)
N/A
Ionizing radiation under fault condition
N/A
6.2
Laser radiation, emission limits to IEC 60825-1:2007
................................................................................... :
LED indicator is used, below
class 1.
class 1.
Pass
Emission limits under fault conditions ..................... :
Pass
7
Heating under normal operating conditions
-
7.1
Temperature rises not exceeding specified values;
fuse links and other protective devices defeated
fuse links and other protective devices defeated
See appended table 7.1.
Pass
7.1.1
Temperature rise of accessible parts
See appended table 7.1.
Pass
7.1.2
Temperature rise of parts providing electrical
insulation
insulation
See appended table 7.1.
Pass
7.1.3
Temperature rise of parts acting as a support or as a
mechanical barrier
mechanical barrier
See appended table 7.1.
Pass
7.1.4
Temperature rise of windings
See appended table 7.1.
Pass
7.1.5
Parts not subject to a limit under 7.1.1 to 7.1.4
See appended table 7.1.
Pass
7.2
Softening temperature of insulating material
supporting parts conductively connected to the
mains carrying a current > 0,2 A at least 150
supporting parts conductively connected to the
mains carrying a current > 0,2 A at least 150
o
C
N/A
Click on the first or last page to see other SB 26 (serv.man3) service manuals if exist.