Read Harman Kardon FESTIVAL 40 (serv.man3) User Guide / Operation Manual online
7
System Connectors
System Cable From Pre Amplifier
(to Main Amplifier)
Connect the wide system cable
(to Main Amplifier)
Connect the wide system cable
a
between the
socket marked
System Cable From Pre Amplifier
on the Amplifier and the socket marked
System Cable Amp
on the Controller.
System Cable From Pre Amplifier
(to CD Changer)
Connect the narrow system cable
(to CD Changer)
Connect the narrow system cable
b
between
the socket marked
System Cable From Pre
Amplifier
on the CD Changer and the socket
marked
System Cable CDP
on the Controller.
Antenna connections
Connect the enclosed FM antenna to the socket
on the Controller labeled
Connect the enclosed FM antenna to the socket
on the Controller labeled
FM 75 Ohms
. Connect
the enclosed AM loop antenna to the screw
terminals on the Controller labeled
terminals on the Controller labeled
AM Loop
.
Switched AC Power Outlets
The AC power cords from the CD Changer
The AC power cords from the CD Changer
d
and from the Amplifier
e can be connected to
AC outlets on the rear of the Controller
. One
additional external component with a power
consumption of less than 100 Watts may be
connected to the third outlet. If in doubt, consult
the power consumption specifications for the
component in its owner's manual.
The AC outlets will provide AC power as soon as
the main Power switch on the controller is pres-
sed in both in Standby or when fully on.
Televisions and external power amplifiers should
not be connected to the controllers AC outlets.
consumption of less than 100 Watts may be
connected to the third outlet. If in doubt, consult
the power consumption specifications for the
component in its owner's manual.
The AC outlets will provide AC power as soon as
the main Power switch on the controller is pres-
sed in both in Standby or when fully on.
Televisions and external power amplifiers should
not be connected to the controllers AC outlets.
Audio/Video Connectors
Video1 In/Out
A videocassette recorder can be connected to
the phono sockets labeled
the phono sockets labeled
Video1 In/Out
.
Connect
Audio Video1 In
on the Controller to
the audio outputs of the VCR for playback from
the VCR. Connect
the VCR. Connect
Audio Video1 Out
on the
Controller to the audio inputs of the VCR to
record from Festival 40 or connected
components.
record from Festival 40 or connected
components.
Connect the yellow
Video1 In
socket on the
Controller to the video output of the VCR for play-
back from the VCR. Connect the yellow
back from the VCR. Connect the yellow
Video1
Out
socket on the Controller to the video input
of the VCR to record from video components
(DVD, etc.) connected to the Controller. Select
this source by pressing
(DVD, etc.) connected to the Controller. Select
this source by pressing
Input Selector
M
(front)
or
Vid1/Vid2
5
(remote) repeatedly until
VIDEO1 appears in the display.
Connect the yellow
Connect the yellow
Monitor
output on the
rear of the Controller to the video input of your
television.
television.
Note: If your VCR or TV does not have audio/
video phono sockets to match the Festival 40,
but only 21-pin Euro/SCART connectors,
adaptors from SCART
video phono sockets to match the Festival 40,
but only 21-pin Euro/SCART connectors,
adaptors from SCART
↔
6 x Phono (see fig. 1)
and/or from 3 x Phono
→
Scart (see fig. 2) or
SCART
→
3 x Phono (see fig. 3) are needed.
Please contact your Harman Kardon dealer for
more information.
more information.
MD In/Out
An audio source which can also record (cassette
deck, Minidisc, etc.) can be connected to the
phono sockets labeled
An audio source which can also record (cassette
deck, Minidisc, etc.) can be connected to the
phono sockets labeled
MD In/Out
. Connect
MD
In
on the Controller to the outputs of the recorder
for playback from the recorder. Connect
MD Out
on the Controller to the inputs of the recorder to
record from Festival 40 or connected compo-
nents. The source selected as playback source
on the Festival 40 (except MD itself), will always
be fed to
record from Festival 40 or connected compo-
nents. The source selected as playback source
on the Festival 40 (except MD itself), will always
be fed to
MD Out
for recording. Select MD as
playback source by pressing
Input Selector
M
(front) repeatedly until
MD appears in the
System
Display
J
or by pressing
MD
3
(remote).
Black
Yellow
Red
Black
Red
Blue
Yellow
Green
White
Figure 2:
Cinch/SCART adapter
for playback;
signal flow:
Cinch
→
SCART
Figure 1:
SCART/Cinch adapter
for record and
playback;
signal flow:
SCART
↔
Cinch
Black
Yellow
Red
Figure 3:
SCART/Cinch adapter
for playback;
signal flow:
SCART
→
Cinch
Click on the first or last page to see other FESTIVAL 40 (serv.man3) service manuals if exist.