Read Harman Kardon DAL 150 (serv.man2) User Guide / Operation Manual online
4
SAFETY INFORMATION
Do Not Open the Cabinet
There are no user-serviceable components inside this product. Opening the cabinet may present a shock hazard,
and any modification to the product will void your warranty.
There are no user-serviceable components inside this product. Opening the cabinet may present a shock hazard,
and any modification to the product will void your warranty.
Installation Location
To ensure proper operation and to avoid the potential for safety hazards, place the unit on a firm and level surface.
Since it is normal for the DAL 150 to become slightly warm during operation, do not place it directly on a
carpeted or other soft surface.
Avoid stringing the cables connected to the DAL 150 across open areas that may present a potential safety
hazard for the user or other persons. Make certain to avoid the possibility of one of the cables being pulled
inadvertently and causing either the DAL 150 or other equipment to fall.
Avoid installation in extremely hot or cold locations, or in an area that is exposed to direct sunlight or heating
equipment. Avoid moist or humid locations.
To ensure proper operation and to avoid the potential for safety hazards, place the unit on a firm and level surface.
Since it is normal for the DAL 150 to become slightly warm during operation, do not place it directly on a
carpeted or other soft surface.
Avoid stringing the cables connected to the DAL 150 across open areas that may present a potential safety
hazard for the user or other persons. Make certain to avoid the possibility of one of the cables being pulled
inadvertently and causing either the DAL 150 or other equipment to fall.
Avoid installation in extremely hot or cold locations, or in an area that is exposed to direct sunlight or heating
equipment. Avoid moist or humid locations.
Cleaning
When the unit gets dirty, wipe it with a clean, soft, dry cloth. If necessary, after disconnecting the unit’s cables, wipe it
with a soft cloth dampened with mild soapy water, then with a fresh cloth with clean water. Wipe dry immediately with a
dry cloth. NEVER use benzene, aerosol cleaners, thinner, alcohol or any other volatile cleaning agent. Do not use abrasive
cleaners, which may damage the finish of metal or other parts. Avoid spraying insecticide near the unit.
When the unit gets dirty, wipe it with a clean, soft, dry cloth. If necessary, after disconnecting the unit’s cables, wipe it
with a soft cloth dampened with mild soapy water, then with a fresh cloth with clean water. Wipe dry immediately with a
dry cloth. NEVER use benzene, aerosol cleaners, thinner, alcohol or any other volatile cleaning agent. Do not use abrasive
cleaners, which may damage the finish of metal or other parts. Avoid spraying insecticide near the unit.
Moving the Unit
Before moving the unit, be certain to disconnect any cables that connect with other components.
Before moving the unit, be certain to disconnect any cables that connect with other components.
Click on the first or last page to see other DAL 150 (serv.man2) service manuals if exist.