DAL 150 (serv.man2) - Harman Kardon Audio User Guide / Operation Manual. Page 8

8

Step Four – Verify Installation
When the installation has finished, a small “hk” logo should appear in the Windows systray or task bar in the lower right
corner of your screen (see Figure 3). If you do not see this logo, try momentarily unplugging the USB cable from your
computer’s USB port, or from the external hub, and then plugging in the USB cable again.

Figure 3 – “hk” logo in systray

Step Five – Install Windows Media Player
Upon installation of the software driver for the DAL 150, the software will automatically check your system 
for the presence of the proper version of Windows Media Player. If you are using the Windows Me or Windows XP
operating system, you should already have Windows Media Player Version 7.0 or higher installed on your system. If the
Player is not found, you will be prompted to install it.
Exit your other applications, and click on the “Yes” button.
You will be prompted by several dialog boxes to:

• Read the license agreement and click “Yes” to accept it;
• Read the “Welcome” box and click “Next” to proceed with the Windows Media Component Setup;
• Read the Privacy Statement, check the box indicating that you have read it, and click the 

“Next” button to proceed;

• Read the list of components that will be installed, uncheck any you do not desire (we recommend installing

all components at this time), and click the “Next” button to proceed;

• Read the configuration screen that determines when the Player will be launched automatically, uncheck any

configurations not desired (you must leave the MPEG Layer 3 files box checked in order for the DAL 150 to
function correctly), and click the “Next” button to proceed;

• Click the “Next” button to install Windows Media Player; and
• Click the “Finish” button once the Setup has completed, which will reboot your computer.