AVR 445 (serv.man2) - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 7

Read Harman Kardon AVR 445 (serv.man2) EMC - CB Certificate online

  
Page 
5
 of 
31
 - 
 
 
www.nemko.com
 
Report No. 
72390 
 
 
IEC/EN 60065 
Clause 
Requirement – Test 
Result - Remark 
Verdict 
3 GENERAL 
REQUIREMENTS 
 
 
Safety class of the apparatus ................................. :
Class II apparatus. 
 
 
 
GENERAL CONDITIONS OF TESTS 
 
4.1.4 Ventilation 
instructions 
require the use of the test 
box 
No test box required. Tested 
according to manufacturers 
instructions. 
 
 
 
5 MARKING 
 
 
Comprehensible and easily discernible 
On front and rear side of the 
enclosure 
 
Permanent durability against water and petroleum 
spirit 
Tested with water / sprit 
5.1 Identification, 
maker, model ................................... :
Brand: Harman / kardon 
Model: AVR 445 
See copy of marking plate. 
 
Class II symbol if applicable 
Class II symbol is applied in 
according to IEC 60417-5172 
 
Rated supply voltage and symbol .......................... :
AC-symbol ( 
~
 ) and 
230V marked 
 
Frequency if safety dependant 
50Hz 
 
Rated current or power consumption ..................... :
1000 W 
5.2 Earth 
terminal 
Class II apparatus 
 
Hazardous live terminals 
No live terminals. 
The output signal will rise to 
43Vp at Pmax, if the speaker 
terminal is disconnected. 
No hazard. 
 
Supply output terminals (other than mains) 
The power is marked close to 
the socket outlet. 
”SWITCHED, 100W, 0.5A 
MAX” marked 
5.3 
Use of triangle with exclamation mark 
Correct symbol applied: 
Imprinted on rear side in 
connection with CAUTION of 
opening. Further; no incorrect 
use of this symbol is found. 
TRF No:  IEC/EN 60065F 
Page of 46
Display

Click on the first or last page to see other AVR 445 (serv.man2) service manuals if exist.