Read Harman Kardon AVR 360 EMC - CB Certificate online
- Page 23 of 44 -
Report
No.
129950
IEC 60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No. IEC60065_I
15.4
Devices forming a part of the mains plug
N/A
15.4.1
No undue strain on mains socket-outlets ……:
The apparatus in not a
device forming a part of the
mains plug.
device forming a part of the
mains plug.
N/A
15.4.2
Device complies with standard for dimensions of
mains plugs …………………………………….:
mains plugs …………………………………….:
N/A
15.4.3
Device has adequate mechanical strength (tests
a,b,c) ……………………………………….:
a,b,c) ……………………………………….:
N/A
16
External flexible cords
16.1
Mains cords sheathed type, complying with
IEC 60227 for PVC or IEC 60245 for synthetic
rubber cords ………………………….:
IEC 60227 for PVC or IEC 60245 for synthetic
rubber cords ………………………….:
Sheathed PVC cord
complying with IEC 60227
complying with IEC 60227
P
Non-detachable cords for Class I have green/yellow
core for protective earth ………………….:
core for protective earth ………………….:
Class II apparatus
N/A
16.2
Mains cords conductors have adequate cross-
sectional area for rated current consumption of the
equipment …………………………………:
sectional area for rated current consumption of the
equipment …………………………………:
The cord is 0,75mm²,
within the current rating
within the current rating
P
16.3
a) Flexible cords not complying with 16.1, used for
interconnections between separate units of
equipment used in combination and carrying
hazardous live voltages, have adequate dielectric
strength …………………………:
interconnections between separate units of
equipment used in combination and carrying
hazardous live voltages, have adequate dielectric
strength …………………………:
No interconnecting cables
comprising hazardous live
conductors.
comprising hazardous live
conductors.
N/A
b) Flexible cords not complying with 16.1, withstand
bending and mechanical stress (3.2 of
IEC 60227-2):
bending and mechanical stress (3.2 of
IEC 60227-2):
Cord complying with 16.1.
N/A
16.4
Flexible cords used for connection between
equipment have adequate cross-sectional areas to
avoid temperature rise under normal and fault
conditions ……………………….:
equipment have adequate cross-sectional areas to
avoid temperature rise under normal and fault
conditions ……………………….:
Cords have adequate
cross-sectional areas to avoid
temperature rise under normal
and fault conditions.
cross-sectional areas to avoid
temperature rise under normal
and fault conditions.
P
16.5
Adequate strain relief on external flexible cords …:
Cord clip wedged in the
enclosure
enclosure
P
Not possible to push cord back into equipment …..:
Checked by inspection
P
Strain relief device unlikely to damage flexible cord
No sharp edges
P
For mains cords of Class I equipment, hazardous
live conductors become taut before earth conductor
live conductors become taut before earth conductor
Class II apparatus
N/A
16.6
Apertures for external flexible cord: no risk of
damage to the cord during assembly or movement
in use …………………………………:
damage to the cord during assembly or movement
in use …………………………………:
No sharp edges
P
Click on the first or last page to see other AVR 360 service manuals if exist.