Read Harman Kardon AVR 35 (serv.man4) User Guide / Operation Manual online
Rear Panel Connections
10
ENGLISH
ª
Center:
Connect these terminals
to the center speaker.
‚
Surround:
Connect these
terminals to the surround speakers.
⁄
Switched AC Outlet:
This outlet
may be used to power any device
that you wish to have turn on when
the unit is turned on with the
that you wish to have turn on when
the unit is turned on with the
System
Power Control
switch
2.
¤
Unswitched AC Outlet:
This
outlet may be used to power any AC
device. The power will remain on at
this outlet regardless of whether the
AVR35RDS is on or off (in Standby
Mode), but the power will be lost as
soon as the AVR35RDS is turned off
completely with the
device. The power will remain on at
this outlet regardless of whether the
AVR35RDS is on or off (in Standby
Mode), but the power will be lost as
soon as the AVR35RDS is turned off
completely with the
Main Power
switch
1.
NOTE:
The power consumption of the
device plugged into these outlets
should not exceed 50 watts (switched)
and 100 watts (unswitched).
should not exceed 50 watts (switched)
and 100 watts (unswitched).
‹
Power Cable:
Connect the AC
plug to a non-switched AC wall
output
output
›
Video 2 Inputs:
Connect these
jacks to the audio and video outputs
of a TV Tuner, Cable TV converter
box, satellite receiver or any other
audio/video source.
of a TV Tuner, Cable TV converter
box, satellite receiver or any other
audio/video source.
fi
TV Monitor Video Output:
Connect this jack to the standard
(composite) video input of a TV
monitor or video projector to view the
output of any standard video source
selected by the receiver’s video
switcher.
(composite) video input of a TV
monitor or video projector to view the
output of any standard video source
selected by the receiver’s video
switcher.
fl
AC-3/PCM Coaxial Input:
Connect the coax digital output from
a DVD player, MD player, LD player
or CD player to this jack. The signal
may be either a Dolby Digital (AC-3)
signal or a standard PCM digital
source.
a DVD player, MD player, LD player
or CD player to this jack. The signal
may be either a Dolby Digital (AC-3)
signal or a standard PCM digital
source.
‡
AC-3/PCM Optical Input:
Connect the optical digital output
from a DVD player, MD player, LD
player or CD player to this jack. The
signal may be either a Dolby Digital
(AC-3) signal or a standard PCM
digital source.
from a DVD player, MD player, LD
player or CD player to this jack. The
signal may be either a Dolby Digital
(AC-3) signal or a standard PCM
digital source.
°
Remote IR In:
If the AVR35RDS’s
front panel IR sensor is blocked due
to cabinet doors or other obstruc-
tions, an external IR sensor may be
used. Connect the output of the
sensor to this jack.
to cabinet doors or other obstruc-
tions, an external IR sensor may be
used. Connect the output of the
sensor to this jack.
·
Remote IR Out:
This connection
permits the IR sensor in the receiver
to serve other remote controlled
devices. Connect this jack to the
“IR IN” jack on Harman Kardon or
other compatible equipment.
to serve other remote controlled
devices. Connect this jack to the
“IR IN” jack on Harman Kardon or
other compatible equipment.
a
Tape Monitor In:
Connect these
jacks to the PLAY/OUT jacks of an
audio recorder.
audio recorder.
b
Tape Monitor Out:
Connect these
jacks to the RECORD/INPUT jacks of
an audio recorder.
an audio recorder.
Click on the first or last page to see other AVR 35 (serv.man4) service manuals if exist.