Read Panasonic CS-VE9NKE / CS-VE12NKE / CU-VE9NKE / CU-VE12NKE Service Manual online
119
16.2.9 Heat Charger Sensor Replacement Procedure
1 Disconnect the sensor connectors from control board. (CN-TH2: red)
2 Open Velcro on soundproof material to expose the sensor.
2 Open Velcro on soundproof material to expose the sensor.
3 Insert flat screwdriver into heat charger fixing bracket to open it wide enough to remove the sensor.
(approximately 7mm)
Do not open the bracket too wide.
Do not open the bracket too wide.
4 Remove polyethylene sheet to expose the heat charger sensor.
5 Replace with a new heat charger sensor, and fix it tightly with adhesive polyethylene sheet at its original
5 Replace with a new heat charger sensor, and fix it tightly with adhesive polyethylene sheet at its original
position.
Click on the first or last page to see other CS-VE9NKE / CS-VE12NKE / CU-VE9NKE / CU-VE12NKE service manuals if exist.