Read JBL PULSE (serv.man6) EMC - CB Certificate online
- Page 7 of 8 -
www.nemko.com
Report No. 241619
Clause
Requirement - Test
Result - Remark
Verdict
JA.2
Inadvertent reactivation
Any safety interlock which can be operated by
means of the test finger, Figure JA.1, is considered
to cause reactivation of the hazard.
Compliance is checked by inspection and, where
necessary, by a test with the test finger, Figure
JA.1.
means of the test finger, Figure JA.1, is considered
to cause reactivation of the hazard.
Compliance is checked by inspection and, where
necessary, by a test with the test finger, Figure
JA.1.
Not Document shredding
machines.
machines.
N/A
JA.3
Isolating switch
Document shredding machines shall incorporate an
isolating switch complying with sub-clause 3.4.2 as
the device disconnecting the power of hazardous
moving parts. For this switch, two-position (single-
use) switch or multi-position (multifunction) switch
(e.g., slide switch) may be used.
If two-position switch, the positions for “ON” and
“OFF” shall be indicated in accordance with sub-
clause 1.7.8. If multi-position switch, the position for
“OFF” shall be indicated in accordance with sub-
clause 1.7.8 and other positions shall be indicated
with proper terms or symbols.
Compliance is checked by inspection.
isolating switch complying with sub-clause 3.4.2 as
the device disconnecting the power of hazardous
moving parts. For this switch, two-position (single-
use) switch or multi-position (multifunction) switch
(e.g., slide switch) may be used.
If two-position switch, the positions for “ON” and
“OFF” shall be indicated in accordance with sub-
clause 1.7.8. If multi-position switch, the position for
“OFF” shall be indicated in accordance with sub-
clause 1.7.8 and other positions shall be indicated
with proper terms or symbols.
Compliance is checked by inspection.
Not Document shredding
machines.
machines.
N/A
JA.4
Protection in operator access areas
Any warning shall not be used instead of the
structure for preventing access to hazardous
moving parts. Document shredding machines shall
comply with the following requirements.
Push the test finger, Figure JA.1, into all openings
in MECHANICAL ENCLOSURES without applying
additional force. It shall not be possible to touch
hazardous moving parts with the test finger. The
document shredding machine is installed as
intended, and all face of MECHANICAL
ENCLOSURES are subjected to this test. Before
testing with the test finger, remove the parts
detachable without a tool.
Push the wedge-probe, Figure JA.2, into the
document-slot. And, against all directions of
openings, if straight-cutting type, a force of 45 N
shall apply to the probe, and 90 N if cross-cutting
type. In this case, the weight of the probe shall not
influence the test. Before testing withy the test
finger, remove the parts detachable without a tool.
It shall not be possible to touch any hazardous
moving parts, including the shredding roller or the
mechanical section for shedding, with the probe.
structure for preventing access to hazardous
moving parts. Document shredding machines shall
comply with the following requirements.
Push the test finger, Figure JA.1, into all openings
in MECHANICAL ENCLOSURES without applying
additional force. It shall not be possible to touch
hazardous moving parts with the test finger. The
document shredding machine is installed as
intended, and all face of MECHANICAL
ENCLOSURES are subjected to this test. Before
testing with the test finger, remove the parts
detachable without a tool.
Push the wedge-probe, Figure JA.2, into the
document-slot. And, against all directions of
openings, if straight-cutting type, a force of 45 N
shall apply to the probe, and 90 N if cross-cutting
type. In this case, the weight of the probe shall not
influence the test. Before testing withy the test
finger, remove the parts detachable without a tool.
It shall not be possible to touch any hazardous
moving parts, including the shredding roller or the
mechanical section for shedding, with the probe.
Not Document shredding
machines.
machines.
N/A
Click on the first or last page to see other PULSE (serv.man6) service manuals if exist.