Read Sony SLV-SE10AE1 / SLV-SE10AE2 / SLV-SE10EE / SLV-SE10EG / SLV-SE20EX / SLV-SE20UX / SLV-SE20VP1 / SLV-SE20VP2 / SLV-SE25B / SLV-SE25CP / SLV-SE25VC / SLV-SE30CP / SLV-SE30EE / SLV-SE30UX / SLV-SE30VC1 / SLV-SE30VC2 / SLV-SE40B / SLV-SE40CP / SLV-SE40EE / SLV- Service Manual online
1-14
Additional Operations
56
SMART
SEARCH
SEARCH
>
/./?//
OK
Searching using
the Smart Search
function
the Smart Search
function
If you record multiple programmes on a
tape, use the Smart Search function to
see what has been recorded on your
tape. You can see information such as
date, time, and channel of programmes
recorded on a tape. You can also start
playback directly from the selected
programme using the SMART SEARCH
screen.
tape, use the Smart Search function to
see what has been recorded on your
tape. You can see information such as
date, time, and channel of programmes
recorded on a tape. You can also start
playback directly from the selected
programme using the SMART SEARCH
screen.
All programmes are listed on the screen,
regardless of how the programme was
recorded.
regardless of how the programme was
recorded.
The data of the last tape inserted into the
VCR is automatically stored in memory.
If you want to recall the latest data
screen, select LATEST DATA in the
SMART SEARCH screen (see page 57).
VCR is automatically stored in memory.
If you want to recall the latest data
screen, select LATEST DATA in the
SMART SEARCH screen (see page 57).
Before you start…
• Turn on your TV and set it to the
video channel.
1
After recording, press 1/u to turn on the VCR.
2
Press SMART SEARCH.
3
Press >/./?// to select the
programme you want to start viewing.
programme you want to start viewing.
4
Press OK.
The VCR starts searching, and playback
starts automatically from the beginning of
the selected programme.
starts automatically from the beginning of
the selected programme.
1
/u
1
2
3
4
5
6
7
8
9
0
SMART SEARCH
EXIT
:
1 4 : 0 0
1 5 : 0 0
FGH
0
1 4 : 0 0
1 5 : 0 0
FGH
2 9 . 9
. 9
3 0 MIN.
BLANK TIME
3
0 : 0 0
1 : 0 0
AAB
0 . 9
2
2
3
SET
:
SELECT
:
OK
SMART SEARCH
1 8 0 MIN.
1 9 : 0 0
2 0 : 0 0
3
2 8 . 9
5
DATE
TIME
PROG.
SMART SEARCH
1 8 0 MIN.
57
Additional Operations
continued
To stop searching
Press p STOP.
To exit the SMART SEARCH screen
Press SMART SEARCH.
To record in a blank space
Blank space on the tape will appear as a blank row in the SMART SEARCH
screen. Select the blank row in step 3, then press OK. The VCR rewinds/
fast-forwards the tape to the beginning of the blank space, then stops. Start
recording.
screen. Select the blank row in step 3, then press OK. The VCR rewinds/
fast-forwards the tape to the beginning of the blank space, then stops. Start
recording.
To recall the latest data screen after you remove the
tape
tape
You can display the data of the last tape used to record a programme, even
after you have removed the tape.
after you have removed the tape.
If you reinsert the tape and record additional programmes, be sure to select
LATEST DATA. Otherwise, all of the data for the tape is deleted.
LATEST DATA. Otherwise, all of the data for the tape is deleted.
1
Reinsert the last tape that you used to record a programme.
2
Press SMART SEARCH.
3
Press >/. to highlight LATEST DATA.
If you want to reset the latest data screen,
highlight NO DATA and press OK, then
record a programme.
highlight NO DATA and press OK, then
record a programme.
4
Press OK.
The latest data stored in the VCR’s memory is displayed.
Tips
• You can store information for up to 24 programmes on a single list.
• While recording, you can display the SMART SEARCH screen using the
• You can store information for up to 24 programmes on a single list.
• While recording, you can display the SMART SEARCH screen using the
SMART SEARCH button. If you decide to stop recording, press SMART SEARCH
to make the SMART SEARCH screen disappear first. Then press p STOP.
to make the SMART SEARCH screen disappear first. Then press p STOP.
1 8 0 MIN.
SMART SEARCH
EXIT
:
SET
:
SELECT :
OK
SMART SEARCH
NO DATA
LATEST DATA
SMART SEARCH
EXIT
:
1 4 : 0 0
1 5 : 0 0
FGH
0
1 4 : 0 0
1 5 : 0 0
FGH
2 9 . 9
. 9
3
0 : 0 0
1 : 0 0
AAB
0 . 9
2
2
3
1 9 : 0 0
2 0 : 0 0
3
DATE
TIME
PROG.
2 8 . 9
5
SET
:
SELECT :
OK
SMART SEARCH
NO DATA
LATEST DATA
Additional Operations
58
A
B
C
A
D
C
Searching using the Smart Search function (continued)
Notes
• If you begin recording a programme “D” from the middle of a previously recorded
• If you begin recording a programme “D” from the middle of a previously recorded
programme “A” and into another previously recorded programme “B,” the Smart
Search information for the second programme “B” which is recorded over is
deleted.
Search information for the second programme “B” which is recorded over is
deleted.
• You cannot use this function unless the clock is set.
• Depending on the tape, the total or remaining time may not appear correctly.
• When recording a short programme (less than 10 minutes in SP mode, or 20 minutes
• Depending on the tape, the total or remaining time may not appear correctly.
• When recording a short programme (less than 10 minutes in SP mode, or 20 minutes
in LP mode), the Smart Search function may not be available or the programme
information may not appear. Also, if you record a long programme directly after a
short programme, the Smart Search information for the short programme may be
deleted.
information may not appear. Also, if you record a long programme directly after a
short programme, the Smart Search information for the short programme may be
deleted.
• Blank space is measured from the end of the last recorded programme to the end of
the tape. However, if you eject the tape then make a new recording on the same
tape, the original recorded programme(s) is displayed as a blank space.
tape, the original recorded programme(s) is displayed as a blank space.
• If no information is stored in the VCR’s memory, LATEST DATA does not appear in
the SMART SEARCH screen.
Originally recorded programmes
Recording the programme “D” over the programme “A” and “B”
59
Additional Operations
Searching using
the index
function
the index
function
The VCR marks the tape with an index
signal at the point where each recording
begins. Use these signals as references to
find a specific recording.
signal at the point where each recording
begins. Use these signals as references to
find a specific recording.
=
/+
INDEX
SEARCH
SEARCH
1
Insert an indexed tape into the VCR.
2
Press =/+ INDEX SEARCH.
• To search ahead, press
+
INDEX SEARCH.
• To search backwards, press
=
INDEX SEARCH.
The VCR starts searching, and playback
starts automatically from that point.
starts automatically from that point.
To stop searching
Press p STOP.
Note
• No index signal will be added when recording starts from recording pause.
• No index signal will be added when recording starts from recording pause.
However, an index signal will be marked if you change the programme position
during recording pause.
during recording pause.
SEARCH
INDEX
1
2
3
Click on the first or last page to see other SLV-SE10AE1 / SLV-SE10AE2 / SLV-SE10EE / SLV-SE10EG / SLV-SE20EX / SLV-SE20UX / SLV-SE20VP1 / SLV-SE20VP2 / SLV-SE25B / SLV-SE25CP / SLV-SE25VC / SLV-SE30CP / SLV-SE30EE / SLV-SE30UX / SLV-SE30VC1 / SLV-SE30VC2 / SLV-SE40B / SLV-SE40CP / SLV-SE40EE / SLV- service manuals if exist.