Read Sony SLV-SE10AE1 / SLV-SE10AE2 / SLV-SE10EE / SLV-SE10EG / SLV-SE20EX / SLV-SE20UX / SLV-SE20VP1 / SLV-SE20VP2 / SLV-SE25B / SLV-SE25CP / SLV-SE25VC / SLV-SE30CP / SLV-SE30EE / SLV-SE30UX / SLV-SE30VC1 / SLV-SE30VC2 / SLV-SE40B / SLV-SE40CP / SLV-SE40EE / SLV- Service Manual online
1-13
Additional Operations
52
To use the shuttle ring in jog mode
Use this mode for frame-by-frame playback.
Press JOG to enter the jog mode. The JOG button lights up. If you change to
the jog mode during any playback mode, the playback pauses so you can see
a still picture. Each change in the shuttle ring position shifts the picture one
frame. To shift frames in reverse, turn the shuttle ring anticlockwise. The
frame shift speed depends on the speed you turn the shuttle ring.
the jog mode during any playback mode, the playback pauses so you can see
a still picture. Each change in the shuttle ring position shifts the picture one
frame. To shift frames in reverse, turn the shuttle ring anticlockwise. The
frame shift speed depends on the speed you turn the shuttle ring.
To resume normal mode, press JOG again. The JOG button goes off.
Tip
• Adjust the picture using the TRACKING +/– buttons if:
• Adjust the picture using the TRACKING +/– buttons if:
– Streaks appear while playing in slow motion.
– Bands appear at the top or bottom while pausing.
– The picture shakes while pausing.
– Bands appear at the top or bottom while pausing.
– The picture shakes while pausing.
To set tracking to the centre position, press both buttons (+/–) at the same time.
Notes
• The sound is muted during these operations.
• The picture may have snow when playing at high speed in reverse.
• The sound is muted during these operations.
• The picture may have snow when playing at high speed in reverse.
(SLV-SE30UX only)
• In the LP mode, noise may appear or there may be no colour.
Playing/searching at various speeds (continued)
53
Additional Operations
Setting the
recording
duration time
recording
duration time
After starting recording in the normal
way, you can have the VCR stop
recording automatically after a specified
duration.
way, you can have the VCR stop
recording automatically after a specified
duration.
1
While recording, press r REC.
The
indicator appears in the display window.
2
Press r REC repeatedly to set the duration.
Each press advances the time in increments of 30 minutes.
The tape counter decreases minute by minute to 0:00, then the VCR
stops recording and turns off automatically.
stops recording and turns off automatically.
To extend the duration
Press r REC repeatedly to set a new duration.
To cancel the duration
Press r REC repeatedly until the
indicator disappears and the VCR
returns to normal recording mode.
To stop recording
To stop the VCR while recording, press p STOP.
Note
• You cannot display the current tape time in the display window when setting the
• You cannot display the current tape time in the display window when setting the
recording duration.
r
REC
0:30
1:00
5:30
6:00
Normal recording
VIDEO
SP
OPC
Additional Operations
54
1
Press 1/u to turn on the VCR.
2
Press MENU, then press >/. to highlight LISTS and press OK.
3
Press >/. to highlight TIMER LIST, then
press OK:
press OK:
• If you want to change or cancel a setting,
go on to the next step.
• If you do not need to change or cancel
the settings, press MENU, then turn off
the VCR to return to recording standby.
the VCR to return to recording standby.
Checking/
changing/
cancelling timer
settings
changing/
cancelling timer
settings
Before you start…
• Turn on your TV and set it to the
video channel.
>
/./?//
OK
CLEAR
MENU
1
/u
1
2
3
4
5
6
7
8
9
0
MENU
EXIT
:
TIMER LIST
CANCEL
SET
:
:
SELECT :
OK
CLEAR
RETURN
2 0 : 0 0
2 1 : 0 0
DATE
TIME
PROG.
AAB
SP
2
0 : 0 0
1 : 3 0
CDE
LP
MON
1 4 : 0 0
1 5 : 0 0
LP
SUN
6 : 3 0
7 : 0 0
LP
–
– : – –
– : – –
–
–
–
– . –
–
– FRI
. 1 0
VPS
PDC
PDC
VPS
PDC
PDC
0
3
. 9
1
1
FGH
I
–
– : – –
– : – –
–
–
–
– . –
–
–
– : – –
– : – –
–
–
–
– . –
–
TUE
2 8 . 9
1 9 : 0 0
2 0 : 0 0
3
SP
TODAY
5
J K
55
Additional Operations
Programme 1
Programme 2
Programme 1
Programme 2
about 20 seconds will be cut off
will be cut off
4
Press >/. to select the setting you want to
change or cancel, then press OK.
change or cancel, then press OK.
The selected setting appears in the TIMER
menu.
menu.
5
• To change the setting, press ?// to highlight the item you want to
change, and press >/. to reset it.
• To cancel the setting, press CLEAR.
6
Press MENU.
If any settings remain, turn off the VCR to return to recording standby.
When the timer settings overlap
The programme that starts first has priority and the second programme
starts recording only after the first programme has finished. If the
programmes start at the same time, the programme listed first in the menu
has priority.
starts recording only after the first programme has finished. If the
programmes start at the same time, the programme listed first in the menu
has priority.
about 20 seconds
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENU
EXIT
:
TIMER
SP / LP
LIST
TIME
PROG.
2
CDE
LP
VPS / PDC
ON
TUE
2 8 . 9
1 0 : 0 0
1 1 : 3 0
. 1 0
Click on the first or last page to see other SLV-SE10AE1 / SLV-SE10AE2 / SLV-SE10EE / SLV-SE10EG / SLV-SE20EX / SLV-SE20UX / SLV-SE20VP1 / SLV-SE20VP2 / SLV-SE25B / SLV-SE25CP / SLV-SE25VC / SLV-SE30CP / SLV-SE30EE / SLV-SE30UX / SLV-SE30VC1 / SLV-SE30VC2 / SLV-SE40B / SLV-SE40CP / SLV-SE40EE / SLV- service manuals if exist.