Read Sony SLV-SE10AE1 / SLV-SE10AE2 / SLV-SE10EE / SLV-SE10EG / SLV-SE20EX / SLV-SE20UX / SLV-SE20VP1 / SLV-SE20VP2 / SLV-SE25B / SLV-SE25CP / SLV-SE25VC / SLV-SE30CP / SLV-SE30EE / SLV-SE30UX / SLV-SE30VC1 / SLV-SE30VC2 / SLV-SE40B / SLV-SE40CP / SLV-SE40EE / SLV- Service Manual online
1-12
Basic Operations
48
Setting the timer manually (continued)
2
Set the date, start and stop times,
programme position, tape speed, and
VPS/PDC function:
programme position, tape speed, and
VPS/PDC function:
1 Press / to highlight each item in turn.
2 Press >/. to set each item.
To correct a setting, press ? to return to
that setting and reset.
2 Press >/. to set each item.
To correct a setting, press ? to return to
that setting and reset.
• To record the same programme every day or the same day every
week, see “Daily/weekly recording” on page 49.
• To use the VPS/PDC function, set VPS/PDC to ON. For details of
the VPS/PDC function, see “Timer recording with VPS/PDC
signals” on page 45.
signals” on page 45.
• To record from a source connected to the LINE-1 (TV) connector,
the LINE-2 IN jacks, or the LINE-3 (Scart) connector, press INPUT
SELECT to display “L1”, “L2”, or “L3” in the “PROG.” position.
SELECT to display “L1”, “L2”, or “L3” in the “PROG.” position.
3
Press MENU to exit the menu.
4
Press 1/u to turn off the VCR.
The
indicator appears in the display window and the VCR
stands by for recording.
To record from a source, leave the connected equipment switched
on.
on.
OK
PLAY
INPUT SELECT
MENU
To stop recording
To stop the VCR while recording, press p STOP.
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENU
EXIT
:
TIMER
SP / LP
LIST
TIME
PROG.
TODAY
5
1 9 : 0 0
2 0 : 0 0
3
SP
VPS / PDC
OFF
TUE
2 8 . 9
Basic Operations
Basic Operations
49
Daily/weekly recording
In step 2 above, press . to select the recording pattern. Each time you press
.
.
, the indication changes as shown below. Press > to change the indication
in reverse order.
Tips
• To set the programme position, you can also use the PROG +/– or programme
• To set the programme position, you can also use the PROG +/– or programme
number buttons.
• To set the tape speed, you can also use the SP/LP button.
• When you are recording a programme in the SP mode and the remaining tape
• When you are recording a programme in the SP mode and the remaining tape
becomes shorter than the recording time, the tape speed is automatically changed to
the LP mode. Note that some interference will appear on the picture at the point the
tape speed is changed. If you want to keep the same tape speed, set AUTO LONG
PLAY to OFF in the OPTIONS-1 menu (page 63).
the LP mode. Note that some interference will appear on the picture at the point the
tape speed is changed. If you want to keep the same tape speed, set AUTO LONG
PLAY to OFF in the OPTIONS-1 menu (page 63).
• Even if you set TIMER OPTIONS to VIDEO PLUS+ in the OPTIONS-2 menu, you
can set the timer manually. Press MENU to select TIMER, then go to step 2.
Notes
• When setting the timer with VPS/PDC signals, enter the start and stop times
• When setting the timer with VPS/PDC signals, enter the start and stop times
exactly as indicated in the TV programme guide, otherwise the VPS/PDC function
won’t work.
won’t work.
• If the VPS/PDC signal is too weak or the broadcasting station failed to transmit
VPS/PDC signals, the VCR will start recording at the set time without using the
VPS/PDC function.
VPS/PDC function.
• The
indicator flashes in the display window when you press 1/u with no tape
inserted.
TODAY n SUN-SAT (Sunday to Saturday) n MON-SAT (Monday to Saturday)
n
n
MON-FRI (Monday to Friday) n SAT (every Saturday) .....
n
MON (every Monday) n SUN (every Sunday) n 1 month later
n
(dates count down) n TOMORROW n TODAY
Additional Operations
50
Additional Operations
Playing/searching
at various speeds
at various speeds
Playback options
View the picture during
fast-forward or rewind
fast-forward or rewind
Play at high speed
Play at twice the normal
speed
speed
Play in slow motion
×
2
&
SLOW
)#
FF
PLAY
Operation
During fast-forward, hold down )# FF/) FF. During
rewind, hold down 03 REW/0 REW.
rewind, hold down 03 REW/0 REW.
• During playback, press )# FF or 03 REW on the remote
commander.
• During playback, hold down )# FF/) FF or 03 REW/
0
REW. When you release the button, normal playback
resumes.
During playback, press
×
2.
During playback, press & SLOW.
03
REW
)#
FF
SLV-SE45UX
SLV-SE30UX
)
FF
PLAY
0
REW
JOG
Shuttle ring
03
REW
1
2
3
4
5
6
7
8
9
0
·
·
51
Additional Operations
Playback options
Play frame by frame
Rewind and start play
Operation
During pause, press )# FF or 03 REW on the remote
commander. Hold down )# FF or 03 REW to play one
frame each second.
commander. Hold down )# FF or 03 REW to play one
frame each second.
During stop, press
PLAY on the VCR while holding down
03
REW/0 REW on the VCR.
To resume normal playback
Press
PLAY.
Using the shuttle ring (SLV-SE45UX only)
With the shuttle ring on the VCR, you can operate a variety of playback
options. There are two ways for using the shuttle ring, normal mode and jog
mode.
To use the shuttle ring in normal mode
options. There are two ways for using the shuttle ring, normal mode and jog
mode.
To use the shuttle ring in normal mode
During playback or pause, turn the shuttle ring clockwise or anticlockwise.
Each change in the shuttle ring position changes the playback mode in the
following way.
Each change in the shuttle ring position changes the playback mode in the
following way.
Pause
High speed
Double speed
Normal speed
(initial speed)
(initial speed)
Slow motion
High speed
in reverse
in reverse
Double speed
in reverse
in reverse
Normal speed
in reverse
in reverse
Slow motion
in reverse
in reverse
continued
·
·
Click on the first or last page to see other SLV-SE10AE1 / SLV-SE10AE2 / SLV-SE10EE / SLV-SE10EG / SLV-SE20EX / SLV-SE20UX / SLV-SE20VP1 / SLV-SE20VP2 / SLV-SE25B / SLV-SE25CP / SLV-SE25VC / SLV-SE30CP / SLV-SE30EE / SLV-SE30UX / SLV-SE30VC1 / SLV-SE30VC2 / SLV-SE40B / SLV-SE40CP / SLV-SE40EE / SLV- service manuals if exist.