Read Sony KV-XG29M30 Service Manual online
– 2 –
KV-XG29M30/XG29M61/XG29M80
RM-952
SPECIFICATIONS
Note
Power requirements
110-240 V AC, 50/60 Hz
220-240 V AC, 50/60 Hz
KV-XG29M30
Power consumption (W)
Indicated on the rear of the TV
Television system
B/G, I, D/K, M
Color system
PAL, PAL 60, SECAM, NTSC4.43, NTSC3.58
Stereo/Bilingual system
NICAM Stereo/Bilingual B/G, I, D/K, A2 Stereo/Bilingual (German) B/G
Channel coverage
B/G
VHF: E2 to E12
UHF: E21 to E69
CATV: S01 to S03, S1 to S41
UHF: E21 to E69
CATV: S01 to S03, S1 to S41
VHF: 0 to 12, 5A, 19A
KV-XG29M30
UHF: 28 to 69
CATV: S01 to S03, S1 to S41
CATV: S01 to S03, S1 to S41
I
UHF: B21 to B68
CATV: S01 to S03, S1 to S41
CATV: S01 to S03, S1 to S41
D/K
VHF: C1 to C12, R1 to R12
UHF: C13 to C57, R21 to R60
CATV: S01 to S03, S1 to S41, Z1 to Z39
UHF: C13 to C57, R21 to R60
CATV: S01 to S03, S1 to S41, Z1 to Z39
M
VHF: A2 to A13
UHF: A14 to A79
CATV: A-8 to A-2, A to W+4, W+6 to W+84
UHF: A14 to A79
CATV: A-8 to A-2, A to W+4, W+6 to W+84
˘
˘
˘
˘
˘
(Antenna)
75-ohm external terminal
Audio output
5W + 5W
Number of terminal
D
(Video)
Input: 3*
Output: 1
Phono jacks; 1 V
P-P
, 75 ohms
* Two input lines available
≥
Audio
Input: 3*
Output: 1
Phono jacks; 500 mVrms
* Two input lines available
2
(Headphone)
Output: 1
Minijack
Picture tube
29 inch
Tube size (cm)
72
Measured diagonally
Screen size (cm)
68
Measured diagonally
Dimension (w/h/d, mm)
794
×
573
×
517
Mass (kg)
48
Design and specifications are subject to change without notice.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY SHADING AND MARK
!
ON
THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN THE
PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE
THESE COMPONENTS WITH SONY PARTS WHOSE PART
NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN
SUPPLEMENTS PUBLISHED BY SONY.
PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE
THESE COMPONENTS WITH SONY PARTS WHOSE PART
NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN
SUPPLEMENTS PUBLISHED BY SONY.
CAUTION
SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND THE
ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR
CARBON PAINTED ON THE CRT, AFTER REMOVING THE
ANODE.
ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR
CARBON PAINTED ON THE CRT, AFTER REMOVING THE
ANODE.
Click on the first or last page to see other KV-XG29M30 service manuals if exist.