KV-XG29M30 - Sony TV Service Manual (repair manual). Page 9

–

 9 
–

Using Your New TV

5

AUTO

PROGR

1

PROGR

VHF  LOW  AUTO

Tips
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular

channel, then preset your TV manually (see page 9).

Note (KV-XG29M80 only)
• During automatic channel presetting, your TV screen will indicate “B/G” ,

“I”, “D/K” or “M” for the TV system.

Notes
• If you connect a monaural VCR, connect the yellow plug to 

 (the yellow

jack) and the black plug to  -L (MONO) (the white jack).

• If you connect  a VCR  to the 8 (antenna) terminal, preset the signal

output from the VCR to the program number 0 on the TV.

• Do not connect video equipment to the t 2 (video input) jacks at the

front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.

• When no signal is input from the connected video equipment, the TV

screen becomes blue.

CAUTION
• Do not connect the power cord until you have completed making all other

connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.

• To avoid battery leakage and damage to the remote, remove the batteries

from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.

Note
• Do not use old batteries nor use different types of batteries together.

Using Your New TV

6

You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game or stereo system.

To watch the video input of the connected equipment, press t (see page 12).

Connecting a camcorder/video game equipment
using the t (video input) jacks

Notes
• You can also connect video equipment to the t 1 or 2 (video input) jacks

at the rear of your TV.

• Do not connect video equipment to the t 2 (video input) jacks at the

front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.

Connecting audio/video equipment using the T
(monitor output) jacks

Note
• When connecting a monaural VCR, connect the yellow plug to 

 (the

yellow jack) and the black plug to  -L (MONO) (the white jack).

2

(MONO)

t

To T
(monitor
output)