Read Sony KV-LS212M50 Service Manual online
– 11 –
KV-LS212M50/M61/M81/N60
RM-GA002
2-13. Lead Assy, Speaker wiredressing
2-14. DY Connector Dressing
Tape
Tape Lead Assy, Speaker in
between of beznet bosses as shown.
Make sure that capacitor does not
touch CRT surface.
between of beznet bosses as shown.
Make sure that capacitor does not
touch CRT surface.
Right Speaker
Left Speaker
Capacitor
Beznet boss
Beznet boss
Make sure Lead Assy,
Speaker is taped to beznet
--> to keep wires away from
rear cover stacking boss.
Speaker is taped to beznet
--> to keep wires away from
rear cover stacking boss.
Use heatsink height to
estimate purse lock location
TVSR (Clause 9.4.7)
:
All wires must be kept away from FBT
area by a distance of 10mm or more.
area by a distance of 10mm or more.
Purse Lock Ø5
Conn Assy, 5P
(200V)
DY Connector
1) DY Connector goes underneath
of Earth Assy, Coating and
Connector Assy, 5P (200V) wire.
of Earth Assy, Coating and
Connector Assy, 5P (200V) wire.
1
2
2) DY Connector goes above
Connector Assy, 5P (200V) wire.
Connector Assy, 5P (200V) wire.
DY Connector
Conn Assy, 5P (200V)
Earth Assy, Coating
Purse Lock Ø5
Dress wires away
from FBT
3
3) Dress DY Connector and
Connector Assy, 5P (200V) wire
with Purse Lock Ø5.
Connector Assy, 5P (200V) wire
with Purse Lock Ø5.
Make sure DY Connector is
on the right side of Earth Assy,
Coating
Click on the first or last page to see other KV-LS212M50 service manuals if exist.