Read Sony KV-HG21M60 Service Manual online
– 9 –
KV-HG21M60/L,M80,M80/H,M80/L,P52/L
RM-GA002
2-7. AC Power Cord , Lead Assy, Earth, Lead Assy & Speaker (Right & Left) dressing
2-8. Earth Coating Assy installation at CRT
1) Dress AC Power Cord, Lead Assy, Earth and Lead Assy, Speaker (Right) inside standing purse lock.
Note : Do not lock the standing purse lock. (will be lock after putting in DGC Conn in Overall Assy)
Keep bunch of wires above of RY600 to avoid wires from being sandwiched with front jack and pushed against relay.
2) Dress AC Power Cord and Lead Assy, Speaker (Left) with Pin, Wire A016 as shown.
Note : Dress AC Power Cord & Lead Assy, Speaker (Left) above the surrounding capacitors to prevent from touching high-temp parts.
Lead Assy,
Lead Assy, Speaker
Figure 6(a)
AC Cord Holder
540 ± 5 mm
Heat Sink, A004
Dress AC Power Cord & Lead Assy,
Speaker (Left) above the surrounding
capacitors to prevent from touching high-
temp parte.
Speaker (Left) above the surrounding
capacitors to prevent from touching high-
temp parte.
AC Power
RY600
Standing
Lead Assy, Speaker
Pin, Wire
Earth Assy,
Coating
Coating
Make sure the
round
side of spring
tension
is installed to Earth
Assy, coating
round
side of spring
tension
is installed to Earth
Assy, coating
Click on the first or last page to see other KV-HG21M60 service manuals if exist.