Read Sony KV-DA292M86 Service Manual online
KV-DA292M86
RM-W105
– 12 –
2-14. Conn Assy Wire Dressing
2-15. Conn Assy wire dressing
2-16. Conn Assy wire dressing
Dress Ferrite Clamp at Conn Assy, 4PVH as shown.
Other CISPR models - no choke coil
Other CISPR models - no choke coil
Dress the Conn Assy, 4P, Conn Assy, 8P and DY Conn together
with Purse Lock dia. 9
with Purse Lock dia. 9
1) Dress the Rotational Coil Conn with pin lead coating, A1801 as shown
2) Dress the Conn Assy, 4P, Conn Assy, 8P, Rotational Coil Conn and DY Conn
2) Dress the Conn Assy, 4P, Conn Assy, 8P, Rotational Coil Conn and DY Conn
together with Purse Lock dia. 11 as shown
Before docking, ferrite core & wire pull
away from chassis
away from chassis
After dock chassis, insert wire into
CRT support hook.
CRT support hook.
Insert other wire end into hook.
Dressing completed.
Dressing completed.
STEP 3
STEP 2
STEP 1
120mm + 5mm
Both side of wire is equal length, so no orientation for insertion.
CN 1651
CN 6604
CN 1651
CN 1651
CN 6604
CN 6604
DY(1) Connector
Conn Assy 8P, CN3802(DL)
Conn Assy, 4P CN6811 (D)
Purse Lock dia.9
CN5400 (VM)
DY Connector
CN9002 (C)
DY Conn
Conn Assy, 4P
Conn Assy, 8P
D PWB
DY 1
Use height of capacitor as a guideline for
positioning purse lock dia.9
Purse Lock, dia 9
CAUTION:
Purse lock location must be at a suitable height from the
board's surface. This is to avoid stress on the connectors.
Purse lock location must be at a suitable height from the
board's surface. This is to avoid stress on the connectors.
Pin Lead Coating, A1801
Rotational Coil Conn
CN5403
Keep away Rotational
Coil Conn from heatsink
Heatsink
Purse lock dia.11
Rotational coil Connector
DY(1) Connector
DY Connector
CN5403 (VM)
Conn Assy 8P, CN3802(DL)
CN5400 (VM1)
Conn Assy, 4P CN6811 (D)
CN9002 (C)
Conn Assy, 4P
CN5403
Purse Lock, dia 11
DY Conn
VM PWB
Conn Assy, 3P
Conn Assy, 8P
Click on the first or last page to see other KV-DA292M86 service manuals if exist.