Read Sony KV-DA292M86 Service Manual online
KV-DA292M86
RM-W105
– 10 –
2-8.
Speaker and Tweeter installation
2-9.
Installation and dressing of Earth Coating Assy
2-10. Wire Harness, A and DGC Conn dressing
Install Right and Left speaker block assy to the beznet as shown
Note: Keep away the capacitor on Lead Assy, Speaker from touching the CRT surface
Note: Keep away the capacitor on Lead Assy, Speaker from touching the CRT surface
1) Earth Coating Assy is installed as shown
2) Install extension spring and coating earth assy as shown
1) Connect the Wire Harness, A to the speaker wire at both side then dress at the DGC Holder
2) Dress DGC Conn at the DGC holder as shown
2) Dress DGC Conn at the DGC holder as shown
Keep away the capacitor on Lead Assy,
Speaker from touching the CRT surface
Speaker from touching the CRT surface
Right Speaker
Left Speaker
Capacitor
Purse Lock, dia. 11
DGC Holder
Ensure the Wire Harness, A is
pulled to make a loop and hook
at the DGC holder
DGC
Wire Harness, A
Wire Harness, A
DGC
Speaker wire
Speaker wire
Ensure DGC Conn is hook at
the DGC Holder.
Hook
Left Side
Right Side
Right side : use the inner hole of the DGC band.
Left side : use the outer hole of the DGC band
Left side : use the outer hole of the DGC band
DGC Band
Hook the extension spring to the outer hook
Click on the first or last page to see other KV-DA292M86 service manuals if exist.