Read Sony KV-AR25M50 Service Manual online
29
Additional Information
Connecting a DVD player to the component video input
terminal (
terminal (
)
1 Using an audio cable, connect R and L under
(component video input) on your
TV to the LINE OUT, AUDIO R and L output connectors on your DVD player.
2 Using a component video cable, connect Y, C
B
, and C
R
under
(component video input) on your TV to the COMPONENT VIDEO OUT Y, C
B
,
and C
R
output connectors on your DVD player.
3 Press DVD on the remote to watch the
(component video input) and “DVD”
will appear on your screen.
DVD player
TV rear panel
Component video cable (not supplied)
Audio cable (not supplied)
Connect
To (on the DVD player)
Y (green)
Y
C
B
(blue)
C
B
, P
B
, C
b
or B-Y
C
R
(red)
C
R
, P
R
, C
r
or R-Y
VIDEO
R-AUDIO-L
LINE OUT
Y
COMPONENT VIDEO OUT
S VIDEO OUT
C
B
C
R
R
L
Y
C
B
C
R
Notes
• If your DVD player can ouput interlace and progressive mode signals, select the interlace
• If your DVD player can ouput interlace and progressive mode signals, select the interlace
output when connecting to
(component video input) on your TV. Your TV can receive
either 525i/60Hz or 625i/50Hz interlace signals.
• Some DVD player terminals may be labeled differently:
• When both
(S video) and
(video) for t 1 or t 3 are connected at the same time,
(S video) is automatically selected. To view
(video), disconnect the S video cable.
• If you select “DVD” on your TV screen, the signal from the T (monitor output) jacks will not
be output properly. This does not indicate a malfunction.
Click on the first or last page to see other KV-AR25M50 service manuals if exist.