Read Sony KV-32HQ100B Service Manual online
- 19 -
2-10. Service Position
To place the chassis in the service position, remove the
SF and MS3 boards from their brackets (see 2-8 and 2-9.),
remove the G1 and D2 brackets and position on the side of
the main bracket as shown above. Insert the main bracket
firmly into the T-slot located on the left corner of the beznet as
indicated (see inset). To gain access to the underside of the
boards follow the instructions on page 2
SF and MS3 boards from their brackets (see 2-8 and 2-9.),
remove the G1 and D2 brackets and position on the side of
the main bracket as shown above. Insert the main bracket
firmly into the T-slot located on the left corner of the beznet as
indicated (see inset). To gain access to the underside of the
boards follow the instructions on page 2
1. [Removal and
Replacement of the main bracket bottom plates].
2-9. MS3 Board Removal
To remove the MS3 board release the two clips circled and
ease the board gently away from the support bracket.
ease the board gently away from the support bracket.
2-8. SF Board Removal
To remove the SF board release the clip circled and
ease the board gently away from the support bracket.
ease the board gently away from the support bracket.
2-11. Wire Dressing
Ensure that wires do not touch heatsinks and high temperature
hotspots. All wires must be kept at a minimum distance of
20mm away from the EHT lead
hotspots. All wires must be kept at a minimum distance of
20mm away from the EHT lead
20mm
20mm
Clips
Clip
Click on the first or last page to see other KV-32HQ100B service manuals if exist.