KV-32HQ100B - Sony TV Service Manual (repair manual). Page 14

Read Sony KV-32HQ100B Service Manual online

- 14 -
TV menu system
18 
Using the TV menu system
This TV contains a menu system which is based on a series of on screen displays.
These displays help you get the most from your TV, from customising the picture and
sound to accessing advanced features. Use the following buttons on the remote
control to operate the TV menu system:
1.
Press the MENU button to display the main menu.
2.
Use the following buttons to operate the menu:
- Press the 
v or V buttons to highlight the required menu or option.
- Press the 
b button to enter the required menu or option.
- Press the 
B button to return to the last menu or option.
- Press the 
v, V, B or b buttons to alter the settings of the selected option.
- Press the OK button to confirm and store your selection.
3.
Press the MENU button to remove the menu from the TV screen.
Picture Adjustment menu
This menu allows you to customise the TV picture settings. Highlight the required
option and press 
b to select. The table below explains each option and how to use it.
Picture Mode
This option allows you to select one of four picture modes. Press 
V or v to select
Live, Personal, Movie or Game. Press OK to confirm your choice.
Contrast, Brightness, Colour, Sharpness, Hue
These options allow you to adjust the contrast, brightness, colour and sharpness.
Press 
B or b to set the levels. Press OK to confirm.
Note:
Hue will only be available if an NTSC broadcast is received.
Reset
This option resets all picture settings to the factory preset levels. Press 
b to
restore default picture settings.
Note:
This feature is only available when ‘Picture Mode’ is set to ‘Personal’.
Noise Reduction
Sometimes a weak signal can produce a snowy picture (called Picture Noise).
This option can help to reduce this effect. Press 
V or v to select Off, Low, Mid,
High or Auto. Press OK to confirm.
Colour Tone
This option allows you to alter the tint of the picture. The settings available are:
Warm:
Gives the white colours a red tint.
Normal:
Gives the white colours a neutral tint.
Cool:
Gives the white colours a blue tint.
Press 
V or v to select Warm, Normal or Cool. Press OK to confirm.
Picture Enhancement
With this option you can enhance the sharpness and contrast levels of the TV
picture. The settings available are:
i-Clear
Optimizes the sharpness levels of the TV picture.  Press 
V or v 
to select Off, Low, Mid or High.  Press OK to confirm.
i-Black
Optimizes the contrast levels of the TV picture.  Press 
V or v to 
select On or Off then press OK to confirm your choice.
Picture adjustment menu
TV menu system
20 
Manual tuning setting screen
Set-up menu
This menu gives you access to more advanced features. The options are:
Language/Country
When you first installed the TV you were asked to select your language and
country. The ‘Language/Country’ option in this ‘Set-up’ menu allows you to
change these settings. With the ‘Language/Country’ option highlighted, press 
b to
enter the ‘Language/Country’ menu. Press 
v  or  V  to select ‘Language’ or
‘Country’. Press 
b to select. Press v or V to highlight the required setting. Press
OK to confirm.
Auto Tuning
All the available channels were tuned in when the TV was first installed. This
‘Auto Tuning’ option allows you to repeat that process (e.g. to re-install the TV at
an alternative location or search for new channels that have been launched by
broadcasters). With the ‘Auto Tuning’ option highlighted, press 
b to select. The
autotune prompt appears on screen. Press OK to start the auto tuning process.
When all available channels have been tuned the TV returns to normal operation.
Programme List Edit
This option allows you to change the order in which the channels are stored on
the TV and delete unwanted channels. With the ‘Programme List Edit’ option
highlighted, press 
b to enter the ‘Programme List Edit’ menu. Press v or  V to
highlight the channel you wish to move to a new position, then press 
b to select
(press the OK button if you wish to delete the channel). Press 
v or V to highlight
the new position for your channel, then press OK button. Your chosen channel
has now moved to the new position. Repeat to move other channels if required.
Manual Tuning
This option allows you to manually tune in channels. With the ‘Manual Tuning’
option highlighted, press 
b to enter the Manual Tuning menu. Press v  or  V to
highlight the programme number you wish to tune. Press OK to confirm, and
display the setting screen. Press 
v  or  V  to highlight System, then press the b
button. Press 
v or V to set the system required. Choose from system B/G or D/K.
Press the 
B button. Press v button to highlight Channel and press the b button.
Press 
v or V to choose ‘C’ for terrestrial or ‘S’ for cable channels. Press the b
button. The channel number is highlighted.
(a)  If you know the channel number you want: Press the numbered buttons
on the remote control to enter the channel number. Press OK to store.
(b)  If you do not know the channel number: Press 
v or V to  SEARCH. 
The TV set automatically searches for the next available TV broadcast
channel or the VCR test signal. When a channel has been found press either
OK to store or 
v or V to continue searching.
Naming a channel
The ‘Label’ option allows you to give the channel a personalised name.
a) Press 
v or V to highlight ‘Label’ then press the  b button to enter.
b) Press the 
v  or  V  button to select the first letter or number of your choice.
Press 
b button to confirm. Select remaining characters in this way, then press
the OK button to store.
AFT (Automatic Fine Tune)
This option allows you to fine tune the channel for optimum result.
a) Press the 
v or V button to highlight ‘AFT’ then press the  b button to enter.
b) Press the 
v or V button to adjust the tuning frequency over a range of -15 to
+15. Press the OK button to store.
Decoder
This option allows you to set a channel for viewing scrambled signal (e.g. from a
pay TV decoder.
a) Press 
v or V to highlight  ‘Decoder’ then press the  b button to enter.
b) Press 
v or V to select AV1 or AV3 depending on which socket your scrambled
signal is connected to. Press the OK button to store.
Set-up menu
Page of 112
Display

Click on the first or last page to see other KV-32HQ100B service manuals if exist.