Read Sony KV-32FQ85B Service Manual online
- 16 -
For safety reasons, on no account should the plates be removed
and not refitted after servicing.
and not refitted after servicing.
REMOVAL AND REPLACEMENT OF THE MAIN
-
BRACKET
BOTTOM PLATES.
(1) REMOVING THE PLATES
In the event of servicing being required to the solder side of the printed wiring boards, the
bottom plates fitted to the main chassis bracket require to be removed. This is performed by
cutting the gates with a sharp wire cutter at the locations indicated by the arrows.
bottom plates fitted to the main chassis bracket require to be removed. This is performed by
cutting the gates with a sharp wire cutter at the locations indicated by the arrows.
Note : There are 2 plates fitted to the main bracket. Only remove the necessary plate to gain
access to the printed wiring board.
(2) REFITTING THE PLATES
Because the plates differ in size it is important that the correct plates are refitted in their original
location.
location.
Please note that the plates need to be rotated 180 degrees from their cut position to allow the
tabs to be fitted into their catch positions.
tabs to be fitted into their catch positions.
Tab
Catch
Click on the first or last page to see other KV-32FQ85B service manuals if exist.