KV-30XBR910 - Sony TV Service Manual (repair manual). Page 22

Start

Finished with HV

service!

Is D board

replaced?

Is FBT/Strike/

Spare mark part

changed?

Confirm +B, and check Hold down on D board with black video with the
following steps:
1. Confirm +B across C6544 to make sure it is 135.3+1Vdc
2.  Apply 5.3+0.5Vdc at pin 2 of CN6544 then confirm set holds down.

Is HV correct?

(30.4+0.2kV)

If all adjustments are finished, then cap and seal

RV8002 with epoxy (or verify RV8002 is capped

and sealed) to prevent any possible misadjustment

by unauthorized service.

1.  Replace RV8002 with the correct part
2.  Adjust RV8002 to 30.40+0.2kV at video
    cut off (black video) after 10-15 min
     warm up.

No

No

No

Yes

Yes

Yes