KV-29FS100 (serv.man4) - Sony TV Service Manual (repair manual). Page 16

Read Sony KV-29FS100 (serv.man4) Service Manual online

— 17 —
KV-29FS100/29FV300/34FS100/
34FV250/38FV250
4-1.  SETTING SERVICE ADJUSTMENT MODE
1.  Standby mode (Power off).
2.  Press the following buttons on the remote commander within a second 
of each other: 
  DISPLAY  
 Channel  5 
 Sound Volume  + 
 Power
4-1-1.  SERVICE ADJUSTMENT MODE IN
Mode
Disp 
Item 
Item
(Item) 
Order 
Data
VP 
7  SERVICE
HSIZ   
TV
1.  The CRT displays the item being adjusted.
2.  Press   1 or  2 on the Remote Commander to select the item.
3.  Press  3 or   6 on the Remote Commander to change the data.
4.  Press MUTING then ENTER to write into memory.
4-1-2.  SERVICE ADJUSTMENT MODE 
MEMORY
ENTER
MUTING
Disp 
Item 
Item
(Item) 
Order 
Data
VP 
7  SERVICE
HSIZ   
TV
Green
Red
1.  Press  then  on the Remote Commander to initialize.
Disp 
Item 
Item
(Item) 
Order 
Data
VP 
WRITE
HSIZ   
TV
Carry out Step 1 when adjusting 
ID’s 0-7 and when replacing and 
adjusting IC003.
2.   DO NOT turn off set until SERVICE appears.
SECTION 4:  CIRCUIT ADJUSTMENTS
ELECTRICAL ADJUSTMENTS BY REMOTE COMMANDER
Use the Remote Commander (RM-Y180, RM-Y181) to perform the circuit adjustments in this section.
Test Equipment Required:   1. Pattern generator   2. Frequency counter   3. Digital multimeter  4.  Audio oscillator
4-2.  MEMORY WRITE CONFIRMATION 
METHOD
1.  After adjustment, pull out the plug from the AC outlet, then replace 
the plug in the AC outlet again.
2.  Turn the power switch ON and set to Service Mode.
3.  Call the adjusted items again to confirm they were adjusted.
4-3.  REMOTE ADJUSTMENT BUTTONS AND 
INDICATORS
RM-Y181
MUTING
(Enter into 
memory)
POWER
(Service Mode)
2
(Device Item Up)
4
Disp. (Item down)
8
(Initialize)
3
Item 
(Data up)
1
Disp. (Item up)
5
(Device item 
down)
ENTER
(Enter into 
memory)
0
(Remove from 
memory)
VOLUME (+)
(Service Mode)
6
Item 
(Data down)
DISPLAY
(Service Mode)
Page of 85
Display

Click on the first or last page to see other KV-29FS100 (serv.man4) service manuals if exist.