Read Sony KV-28HX15B Service Manual online
- 10 -
14
Menu System
AV2 OUTPUT
The “AV2 Output” option in the “Detail Set Up” menu allows you to select the
source to be output from the Scart connector
The “AV2 Output” option in the “Detail Set Up” menu allows you to select the
source to be output from the Scart connector
2/
in order you can
record from this Scart any signal coming from the TV or from external
equipment connected to the Scart connector
equipment connected to the Scart connector
1/
or front connectors
3 and
3.
If your VCR supports SmartLink, this procedure is not necessary.
To do this: after selecting the option, press
. Then press
or
to select
the desired output signal: TV, AV1, AV3 or AUTO.
Notes:
If you select “AUTO”, the output signal will always be the same one that is displayed
on the screen.
If you select “AUTO”, the output signal will always be the same one that is displayed
on the screen.
If you have connected a decoder to the scart connector
2/
or to a VCR
connected to this scart, please remember to change back the “AV2 Output” to
“AUTO” or “TV” for correct unscrambling.
“AUTO” or “TV” for correct unscrambling.
RGB CENTRING
When connecting an RGB source, such as a “PlayStation”, you may need to
readjust the horizontal position of the picture. In that case, you can readjust
it through the “RGB Centring” option in the “Detail Set Up”.
When connecting an RGB source, such as a “PlayStation”, you may need to
readjust the horizontal position of the picture. In that case, you can readjust
it through the “RGB Centring” option in the “Detail Set Up”.
To do this: while watching an RGB source select the “RGB Centring” option
and press
and press
. Then press
or
to adjust the centre of the picture
between –10 and +10. Finally press OK to confirm and store.
PICTURE ROTATION
Because of the earth’s magnetism, the picture may slant. In this case, you
can correct the picture slant by using the option “Picture Rotation” in the
“Detail Set Up” menu.
Because of the earth’s magnetism, the picture may slant. In this case, you
can correct the picture slant by using the option “Picture Rotation” in the
“Detail Set Up” menu.
To do this: after selecting the option, press
. Then press
or
to
correct any slant of the picture between -5 and +5 and finally press OK to
store.
store.
S
S
Detail Set Up
Auto Format:
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
On
Auto
TV
0
0
Auto
TV
0
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Detail Set Up
Auto Format:
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
On
Auto
TV
0
0
Auto
TV
0
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Detail Set Up
Auto Format:
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
On
Auto
TV
0
0
Auto
TV
0
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
15
Teletext
Teletext is an information service transmitted by most TV stations. The index
page of the teletext service (usually page 100) gives you information on how
to use the service. To operate teletext, use the remote control buttons as
indicated below. Please ensure you use a channel (TV Broadcast) with a
strong signal, otherwise teletext errors may occur.
page of the teletext service (usually page 100) gives you information on how
to use the service. To operate teletext, use the remote control buttons as
indicated below. Please ensure you use a channel (TV Broadcast) with a
strong signal, otherwise teletext errors may occur.
To switch on Teletext :
After selecting the TV channel which carries the teletext service you wish to
view, press
After selecting the TV channel which carries the teletext service you wish to
view, press
.
To select a Teletext page:
Input 3 digits for the page number, using the numbered buttons.
• If you have made a mistake, retype the correct page number.
• If the counter on the screen continues searching, it is because this page is
Input 3 digits for the page number, using the numbered buttons.
• If you have made a mistake, retype the correct page number.
• If the counter on the screen continues searching, it is because this page is
not available. In that case, input another page number.
To access the next or preceding page:
Press PROGR + (
Press PROGR + (
) or PROGR - (
).
To superimpose teletext on to the TV:
Whilst you are viewing teletext, press
Whilst you are viewing teletext, press
. Press it again to cancel teletext
mode.
To freeze a teletext page:
Some teletext pages have sub-pages which follow on automatically. To stop
them, press
Some teletext pages have sub-pages which follow on automatically. To stop
them, press
/
. Press it again to cancel the freeze.
To reveal concealed information (e.g: answer to a quiz):
Press
Press
/
. Press it again to conceal the information.
To Switch Off Teletext:
Press .
Press .
Fastext
Fastext service lets you access pages with one button push. When you are
in Teletext mode and Fastext is being broadcast, a colour coded menu
appears at the bottom of the teletext page. Press the colour button (red,
green, yellow or blue) to access the corresponding page.
in Teletext mode and Fastext is being broadcast, a colour coded menu
appears at the bottom of the teletext page. Press the colour button (red,
green, yellow or blue) to access the corresponding page.
Teletext
TELETEXT
Index
Programme
News
Sport
Weather
Programme
News
Sport
Weather
25
153
101
101
98
Click on the first or last page to see other KV-28HX15B service manuals if exist.