KV-28HX15B - Sony TV Service Manual (repair manual). Page 7

 

The Auto Tuning menu appears on the screen. Press the OK button to 
select Yes.

The TV starts to automatically search and store all available broadcast 
channels for you.  This procedure could take some minutes. Please be 
patient and do not press any buttons, otherwise the automatic tuning will not 
be completed.

If no channels were found during the auto tuning process then a new menu 
appears automatically on the screen asking you to connect the aerial. 
Please connect the aerial (see page 7) and press OK. The auto tuning 
process will start again.

After all available channels are captioned and stored, the Programme 
Sorting menu appears automatically on the screen enabling you to change 
the order in  which the channels appear on the screen.

a) If you wish to keep the broadcast channels in the tuned order, go to step 
8.

b) If you wish to store the channels in a different order:

i) Press the

or

button to select the programme number with the 

channel (TV Broadcast) you wish to rearrange, then press the

button.

ii) Press the

or

button to select the new programme number position 

for your selected channel (TV Broadcast), then press

.

iii) Repeat steps b)1 and b)2 if you wish to change the order of the other 
channels.

Press the MENU button to remove the menu display from the TV screen.

No channel found

Please connect aerial

Confirm

OK

  Programme:                   01

  System:                       B/G

  Channel:                      C21

Auto Tuning

  Searching...

 Programme Sorting

Select channel:
Exit:    

MENU

  Programme:
   01     TVE
   02    TVE2
   03     TV3
   04     C33
   05     C27                   
   06     C58

OK

 Programme Sorting

Select new position:
Exit:    

MENU

  Programme:
   01     TVE
   02    TVE2
   03     TV3
   04     C33
   05     C27                   
   

06     C58

         05       C27

OK

Do you want to start 

automatic tuning?

Yes

No

OK

The first time you switch on your TV, a sequence of menu screens appear on 
the TV enabling you to: 1) choose the language of the menu screen, 
2) choose the country in which you wish to operate the TV, 3) adjust the 
picture slant, 4) search and store all available channels (TV broadcasts) and 
5) change the order in which the channels (TV broadcasts) appear on the 
screen. However, if you need to change any of these settings at a later date, 
you can do that by selecting the appropriate option in the 

 (Set Up menu) 

or by pressing the Auto Start Up Button 

 on the TV set. 

If picture slants, please

adjust picture rotation

Not necessary

Adjust now

OK

Connect the TV plug to the mains socket (220-240V AC, 50Hz).

Press the 

 on/off button on the TV set to turn on the TV. The first time 

you press this button, a Language menu displays automatically on the TV 
screen.

Press the

or

button on the remote control to select the language, 

then press the OK button to confirm your selection. From now on all the 
menus appear in the selected language. 

The Country menu appears automatically on the TV screen. Press 
the

or

button to select the country in which you will operate the TV 

set, then press the OK button to confirm your selection.

• 

If the country in which you want to use the TV set does not appear in 
the list, select “-” instead of a country.

• 

To avoid wrong teletext characters for cyrillic languages we 
recommend selecting ‘Russia’ if your own country does not appear in 
the list. 

 Because of the earth’s magnetism, the picture might slant. The Picture 

Rotation menu allows you to correct the picture slants if it is necessary.

a)   If it is not necessary, press

or

to select Not necessary and 

press OK.

b)  If it is necessary, press

or

to select Adjust now, then press 

OK and correct any slant of the picture between –5 and +5 by 
pressing

or

. Finally press OK to store.

The operating instructions mentioned here are partial abstracts from the ‘Operating
Instruction Manual’. The page numbers of the ‘Operating Instruction Manual’ remain
as in the manual.