KV-28FX66B - Sony TV Service Manual (repair manual). Page 10

(depending on availability of service).

NexTView is an on-screen electronic programme guide, providing you with programme 
information for different broadcasters.
When looking for information you can search by theme (sports, art, etc...) or date.

Select a broadcast channel providing a NexTView service. In this case the indication 
“NexTView” is displayed as soon as data is available.

Press the

 

 

button on the remote control to switch NexTView on and off.

To navigate through NexTView:

• moving to right or left press

 or

.

• moving up or downwards, press

or

.

• confirming a selection, press OK.

Icons for different themes (see the 
“Icons’ key” section on next page)

Date

Programme list

Record:

This function only  works if you 
have connected a VCR which 
supports SmartLink and Timer 
Programming feature.

If you wish to record the selected 
programme, press the red button 
on the remote control.

Remind:
If you wish to be reminded when the 
selected programme is broadcasted, 
press the green button on the remote 
control. At the time that programme 
should be displayed a reminder 
message is displayed on the TV.

continued...

In it’s default condition this remote control will operate the basic functions of this Sony TV, Sony 
DVDs and most Sony VCRs. To control VCRs and DVDs of other manufacturers (and some Sony 
VCR models), please complete the following steps:

Before you start, look up the 3 digit code for your brand of DVD or VCR from the list 

below. On those brands that have more than one code, enter the first code number.

Press the Media Selector button on the remote control repeatedly until the 
required green light (VCR or DVD) is lit.

   If Media Selector is on TV position, code numbers will not be stored.

Before the green light goes out, press and hold the yellow button for 
approximately 6 seconds until the green light starts flashing.

Whilst the green light is flashing, enter all three digits of the code for your 
brand of VCR or DVD using the number buttons on the remote control. 

 If your selected code is entered correctly, all three green lights will be lit   

  momentarily.

Turn on your VCR or DVD and check that the main functions work.

• If your device is not working or some of the functions do not work 

please check that you entered the correct code set or try the next code 
listed against the brand. 

• Your brand codes may be lost if weak batteries are not replaced within 

a few minutes. To reset your brand of DVD or VCR please repeat the 
above steps. A small label is added inside the battery door to allow you 
to record your brand codes.

• Not all brands are covered and not all models of every brand may be 

covered.

SONY (VHS)

301, 302, 303, 308, 309

SONY

001

SONY (BETA)

303, 307, 310

AIWA

021

SONY (DV)

304, 305, 306

DENON

018, 027, 020, 002

AIWA

325, 331, 351

GRUNDIG

009, 028, 023, 024, 016, 003

AKAI

326, 329, 330

HITACHI

025, 026, 015, 004

DAEWOO

342, 343

JVC

006, 017

GRUNDIG

358, 355, 360, 361, 320, 351

KENWOOD

008

HITACHI

327, 333, 334

LG

015, 014

JVC

314, 315, 322, 344, 352, 353, 

LOEWE

009, 028, 023, 024, 016, 003

354, 348, 349

MATSUI

013, 016

LG

332, 338

ONKYO

022

LOEWE

358, 355, 360, 361, 320, 351

PANASONIC

018, 027, 020, 002

MATSUI

356, 357

PHILIPS

009, 028, 023, 024, 016, 003

ORION

328

PIONEER

004

PANASONIC

321, 323

SAMSUNG

011, 014

PHILIPS

311, 312, 313, 316, 317, 318, 

SANYO

007

358, 359

SHARP

019, 027

SAMSUNG

339, 340, 341, 345

THOMSON

012

SANYO

335, 336

TOSHIBA

003

SHARP

324

YAMAHA

018, 027, 020, 002

THOMSON

319, 350

TOSHIBA

337