KV-28FX66B - Sony TV Service Manual (repair manual). Page 7

continued...

Language

English
Norge
Français
Italiano
Nederlans

Select Language:

Confirm: OK

If picture slants, please

adjust picture rotation

Not necessary

Adjust now

Select:

Confirm: OK

The first time you switch on your TV, a sequence of menu screens appear on the TV 
enabling you to: 1) choose the language of the menu screen, 2) adjust the picture slant, 
3) asign an ID to your remote control, 4) search and store all available channels (TV 
Broadcast) and 5) change the order in which the channels (TV Broadcast) appear on the 
screen.
However, if you need to change any of these settings at a later date, you can do that by 
selecting the appropriate option in the 

 (Set Up menu) or by pressing the Auto Start Up 

Button 

 on the TV set. 

Connect the TV plug to the mains socket (220-240V AC, 
50Hz)
The first time that the TV set is connected, it is usually 
turned on. If the TV is off, press the 

 on/off button on 

the TV set to turn on the TV.
The first time you switch on the TV, a Language menu 
displays automatically on the TV screen.

Press the 

or

button on the remote control to select 

the language, then press the OK button to confirm your 
selection. From now on all the menus will appear in the 
selected language. 

Because of the earth’s magnetism, the picture might slant. 
The Picture Rotation menu allows you to correct the 
picture slant if it is necessary.

  If it is not necessary, press OK

 

to select Not necessary.

If it is necessary, press

or

to select Adjust now, 

then press OK and correct any slant of the picture 
between –5 and +5 by pressing

or

. Finally press 

 to store.

Programme:                  
Channel:                      

  Searching...

  1

 C 01

Auto Tuning

Do you want to start 

automatic tuning?

Yes

No

No channel found

Please connect aerial

Confirm

You can assign an ID (number) to your Remote Control to 
avoid interference from other locators when you press the 
Remote Control Locator button on the TV set.

 If you do not want to configure it, press OK to select 

.

If you want to configure it press

to select Yes. Press 

. Next press one of the number buttons (0-9) and 

press OK to store.

The remote control beeps. Press OK to stop 

beeping.

 ID should be assigned anytime the batteries of the 

remote control will be replaced.

Finally press OK to continue the process.

The Auto Tuning menu appears on the screen. Press the

  OK button to select Yes.

The TV starts to automatically search and store all

  available broadcast channels for you. 

 This procedure could take some minutes. Please be

 

 patient and do not press any buttons, otherwise 

 

 automatic tuning will not be completed.

In some countries the TV Broadcaster installs the 
channels automatically (ACI system). In this case, 
the TV Broadcaster sends a menu in which you can 
select your city by pressing the

or

button and 

 to store the channels.

If no channels were found during the auto tuning 
process then a new menu appears automatically on 
the screen asking you to connect the aerial. Please 
connect the aerial (see page 6) and press OK. The 
auto tuning process will start again.

Do you want to configure your

Remote Control ID?

Yes

No

Select:

Confirm: OK

Remote Control ID

Introduce New ID

with number buttons:

-

Enter: 0-9

Confirm: OK

Remote Control ID

New ID is: 5

Now beeping, please

press any button to stop.

Confirm: OK

Remote Control ID

continued...

The operating instructions mentioned here are partial abstracts from the ‘Operating
Instruction Manual’. The page numbers of the ‘Operating Instruction Manual’ remain
as in the manual.