Read Sony KP-44DX2U Service Manual online
– 6 –
KP-44DX2
RM-948
9
GB
Switching
On
the
Projection
TV
and
Automatically
Tuning
The
first
time
you
switch
on
your
TV,
a
sequence
of
menu
screens
appear
on
the
TV
enabling
you
to
choose
the
language
of
the menu screen and search and store all available channels (TV Broadcast).
However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate option in
the
(Set Up menu) or by pressing the Auto Start Up Button
/
on the TV set.
1
Connect the Projection TV plug to the mains socket (220-240V AC, 50Hz)
The
first
time
that
the
TV
set
is
connected,
it
is
usually
turned
on.
If
the
TV
is
off,
press the
on/off button on the TV set to turn on the TV.
The
first
time
you
switch
on
the
TV,
a
Language
m
enu
displays
automatically
on
the TV screen.
2
Press the
v
or
V
button on the remote control to select the language, then press
the
OK
button
to
confirm
your
selection.
From
now
on
all
the
menus
will
appear
in the selected language.
3
The Auto Tuning menu appears on the screen. Press the
OK
button to select
Yes
.
4
The
projection
TV
starts
to
automatically
search
and
store
all
available
broadcast
channels for you as follows:
a)
The Digital autotune display appears on screen and the search and store
procedure
begins.
All
the
available
Digital
channels
will
now
be
captured
and
stored. As this may take some time, a message is included in the display to
inform you of the tuning progress.
b)
W
hen
Digital
tuning
is
complete,
the
analogue
display
appears
automatically
and the search and store procedure for the analogue channels begins.
•
T
his
procedure
could
take
some
minutes.
Please
be
patient
and
d
o
not
press any buttons, otherwise automatic tuning will not be completed.
•
If no Digital and no Analogue channels were found during the auto
tuning
process
then
a
new
m
enu
appears
automatically
on
the
screen
asking
you
to
connect
the
aerial.
Please
connect
the
aerial
(see
page
8)
and press
OK
. The auto tuning process will start again.
•
O
nce all Digital and Analogue channels have been captured and
stored, the TV returns to normal operation and displays the Digital
channel captured on channel number 1.
If no Digital channels are captured, the Analogue channel that is
stored on channel number 1 is displayed.
Your projection TV is now ready for use.
Language
English
Norge
F
rançais
It
aliano
Nederlans
Select Language:
Confirm: OK
Language
English
Norge
F
rançais
It
aliano
Nederlans
Select Language:
Confirm: OK
Language
English
Norge
F
rançais
It
aliano
Nederlans
Select Language:
Confirm: OK
Prog
ramme:
Channel:
Searching...
1
C 01
A
u
to T
uning
Do y
ou w
ant to star
t
automatic tuning?
Ye
s
No
No channel f
ound
Please connect aer
ial
Confir
m
Tuning t
h
e Digital C
h
annels
Auto T
uning
The number of stored services 16
0% 100%
Searching. . .
63 %
Press Blue key to cancel
Auto
T
uning.
Cancel
Tuning
the
Analogue
Channels
First Time Operation
10
Adjusting Colour Registration (Convergence)
Due to the earth’s magnetism, the picture might become undefined and you could see different colours on the outlines of
the images.
In that case, proceed as follows.
Auto converge the Red, Green, and Blue Lines
1
Press on the mark
, on the right side of the projection TV.
2
Press
/
button.
The
Auto
Convergence
function
works
for
about
10
seconds.
When
the
white
cross
disappears
from the screen, your projection TV is ready for use.
The Auto Convergence function does not work when:
• no signal is input.
• the input signal is weak.
• the screen is exposed to spotlights or direct sunlight.
• you watch the teletext broadcast.
First Time Operation
The operating instructions mentioned here are partial abstracts
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remain as in the manual.
SECTION 2
GENERAL
Click on the first or last page to see other KP-44DX2U service manuals if exist.