Read Sony KF-E42A10 / KF-E50A10 (serv.man3) Service Manual online
– 12 –
KF-E42A10/E50A10
RM-GA004
CONFIGRATION
00
SERVICE
CP18_COLOR_SYS
00
00A0
BE Micro
Press Channel-4
Press Channel-4
m
GW_SPECIAL
34
SERVICE
LAMP_TIME
02
00000014
BE Micro
m
Press Channel-5 7 times,
Channel-1
Channel-1
GW_SPECIAL
34
SERVICE
PANEL_TIME
01
00000014
BE Micro
OPTION_E
20
SERVICE
LAMP
01
0000
BE Micro
m
Reading Lamp and Panel time
Use the following to determine the lamp and panel time of a set.
Use the following to determine the lamp and panel time of a set.
Screen Display Method
In standby mode, press the buttons on the Remote Commander sequentially, in rapid succession, as shown below:
In standby mode, press the buttons on the Remote Commander sequentially, in rapid succession, as shown below:
1. Press [Display] , Channel 5 , Sound Volume [+] , Power ON
2. To enter BE-micro service menu, press JUMP 2 times.
3. To display the lamp time, press Channel-4.
The screen displays:
“ Total lamp time is 14 hours”
“ Total lamp time is 14 hours”
4. To display the panel time, press Channel-4.
The screen displays:
“ Total panel time is 14 hours”
“ Total panel time is 14 hours”
5. To display the lamp time clear, press Channel-5
7 times and Channel-1.
To reset the lamp time press Channel-3 > MUTING > ENT.
WRITE (Character color is red) is momentarily displayed and the lamp time is reset to “0”.
WRITE (Character color is red) is momentarily displayed and the lamp time is reset to “0”.
Exiting Service Mode
To exit the service mode, please turn off the set using the Remote Commander or the power switch.
To exit the service mode, please turn off the set using the Remote Commander or the power switch.
Click on the first or last page to see other KF-E42A10 / KF-E50A10 (serv.man3) service manuals if exist.