Read Sony KF-E42A10 / KF-E50A10 (serv.man3) Service Manual online
CHASSIS
TRINITRON
®
COLOR TV
SERVICE MANUAL
MIX5
MODEL
COMMANDER DEST.
CHASSIS NO.
KF-E42A10
RM-GA004
E
KF-E42A10
RM-GA004
OCE
KF-E42A10
RM-GA004
Thailand
KF-E50A10
RM-GA004
E
KF-E50A10
RM-GA004
OCE
KF-E50A10
RM-GA004
Thailand
MODEL
COMMANDER
DEST. CHASSIS NO.
PUSH OPEN
WEGA GATE
TV/VIDEO
CANNEL
VOLUME
POWER
TIMER
LAMP
POWER/STANDBY
RM-GA004
KF-E42A10/E50A10
– 2 –
KF-E42A10/E50A10
RM-GA004
Specifications
Display Unit
Power Requirement:
220-240 V AC, 50/60 Hz
Projection System
3 LCD (Liquid Crystal Display) Panels, 1 lens
projection system
projection system
LCD Panel
Size 0.73 inch TFT LCD panel
Resolution 1,280 pixels 720 lines
Resolution 1,280 pixels 720 lines
Projection Lenses
High performance, large-diameter highbrid lens F2.4
Lamp
UHP lamp, 100 W, XL-2400
Screen Size:
KF-E50A10: 50 inches (approx. 125.5 cm measured
diagonally)
KF-E42A10: 42 inches (approx. 105.2 cm measured
diagonally)
diagonally)
KF-E42A10: 42 inches (approx. 105.2 cm measured
diagonally)
Display Resolution:
1,280 pixels (horizontal)
⋅
⋅
⋅
⋅
⋅
⋅
⋅
720 lines (vertical)
Power Consumption:
KF-E50A10: 195 W
KF-E42A10: 195 W
KF-E42A10: 195 W
Standby Power Consumption:
KF-E50A10: 1 W or less
KF-E42A10: 1 W or less
KF-E42A10: 1 W or less
Dimensions (w h d) :
KF-E50A10:
Approx. 1,184 827 408
Approx. 1,184 827 408
mm
KF-E42A10:
Approx. 999 72 2 357 mm
Approx. 999 72 2 357 mm
Weight:
KF-E50A10: Approx. 32 kg
KF-E42A10: Approx. 27 kg
KF-E42A10: Approx. 27 kg
TV System
I, D/K, B/G, M
Colour System
PAL, PAL60, SECAM, NTSC 4.43, NTSC 3.58
Antenna
75 ohm external terminal
Channel Coverage
B/G
VHF: E2 to E12 / UHF: E21 to E69 /
CATV: S01 to S03, S1 to S41
CATV: S01 to S03, S1 to S41
VHF: 0 to 12, 5A, 19A / UHF: 28 to 69 /
CATV: S01 to S03, S1 to S41(Australia only)
CATV: S01 to S03, S1 to S41(Australia only)
VHF: 1 to 11 / UHF: 21 to 69 /
CATV: S01 to S03, S1 to S41(New Zealand only)
CATV: S01 to S03, S1 to S41(New Zealand only)
I
UHF: B21 to B68 / CATV: S01 to S03, S1 to S41
D/K
VHF: C1 to C12, R1 to R12 / UHF: C13 to C57,
R21 to R60 /
CATV: S01 to S03, S1 to S41, Z1 to Z39
R21 to R60 /
CATV: S01 to S03, S1 to S41, Z1 to Z39
M
VHF: A2 to A13 / UHF: A14 to A79 /
CATV: A8 to A2, A to W+4, W+6 to W+84
CATV: A8 to A2, A to W+4, W+6 to W+84
Terminals
S VIDEO 1 (4-pin mini DIN):
Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative
C: 0.286 Vp-p (Burst signal), 75 ohms
C: 0.286 Vp-p (Burst signal), 75 ohms
VIDEO/AUDIO IN 1/3:
/
VIDEO:
1 Vp-p, 75 ohms unbalanced, sync negative
AUDIO:
500 mVrms
Impedance: 47 kilohms
Impedance: 47 kilohms
VIDEO/AUDIO IN 2:
/
/
Y, P
B
/C
B
, P
R
/C
R
(Component video) :
Y : 1.0 Vp-p, 75 ohms unbalanced, sync negative
P
P
R
/C
R
: 0.7 Vp-p, 75 ohms
P
B
/C
B
: 0.7 Vp-p, 75 ohms
Signal format : 480i, 576i, 480p, 576p, 720p,1080i
VIDEO:
1 Vp-p, 75 ohms unbalanced, sync negative
AUDIO:
500 mVrms
Impedance: 47 kilohms
Impedance: 47 kilohms
HD/DVD IN 1/2:
/
Y, P
B
/C
B
, P
R
/C
R
(Component video) :
Y : 1.0 Vp-p, 75 ohms unbalanced, sync negative
P
P
R
/C
R
: 0.7 Vp-p, 75 ohms
P
B
/C
B
: 0.7 Vp-p, 75 ohms
Signal format : 480i, 576i, 480p, 576p, 720p,1080i
AUDIO:
500 mVrms
Impedance: 47 kilohms
Impedance: 47 kilohms
VIDEO/AUDIO OUT:
/
VIDEO:
1 Vp-p, 75 ohms unbalanced, sync negative
AUDIO:
More than 1 Vrms at the maximum volume setting
AUDIO OUT:
More than 1 Vrms at the maximum volume setting
(Variable)
More than 500 mVrms (Fixed)
(Variable)
More than 500 mVrms (Fixed)
PC IN :
VIDEO:
(RGB)
D-sub 15-pin, analogue RGB, 0.7 Vp-p, 75 ohms,
positive
positive
AUDIO:
Stereo minijack, 0.5 Vrms, 1 kilohm
See the PC Input Signal Compatibility Chart on page 27.
HDMI IN:
HDMI
Video: 480i, 480p, 576i, 576p, 720p, 1080i
Audio: Two channel linear PCM 32, 44.1 and
48 kHz, 16, 20 and 24 bits
Audio: Two channel linear PCM 32, 44.1 and
48 kHz, 16, 20 and 24 bits
AUDIO:
500 mVrms (100% modulation)
Impedance: 47 kilohms
Impedance: 47 kilohms
Headphones i
Stereo minijack
Impedance: 16 ohms
Impedance: 16 ohms
Sound Output
KF-E50A10: 12 W + 12 W
KF-E42A10: 12 W + 12 W
KF-E42A10: 12 W + 12 W
Design and specifications are subject to change
without notice.
without notice.
– 3 –
KF-E42A10/E50A10
RM-GA004
Overview of the TV buttons and indicators
1 WEGA GATE
Displays WEGA GATE.
2
Confirms the selection or setting.
Selects the video equipment connected to the TV’s video inputs.
Selects the video equipment connected to the TV’s video inputs.
3
2 +/-/
/
Increases (+) or decreases (-) the volume.
In TV menu: Moves through the options left (
In TV menu: Moves through the options left (
) or right (
).
4 PROG +/-/
/
In TV mode: Selects the next (+) or previous (-) channel.
In TV menu: Moves through the options up (
In TV menu: Moves through the options up (
) or down (
).
5
indicator
Lights up in amber when the Sleep Timer/On Timer is set.
6
indicator
Flashes up in red when the lamp for the light source has burned out.
7
\ 1 indicator
Flashes in green when the light source is preparing to turn on. Lights up in green when the TV is switched on.
Lights up in red when the TV is in standby mode. When the lamp door or the lamp itself is not securely attached, the
red indicator will continue to flash in intervals of three blinks at a time.
Lights up in red when the TV is in standby mode. When the lamp door or the lamp itself is not securely attached, the
red indicator will continue to flash in intervals of three blinks at a time.
8 Remote control sensor
Point the remote here.
9
1
Switches the TV on or off.
WEGA GATE
PROG
WEGA GATE
PROG
2
1
9
3
6
7
8
0
To open the panel
To open the front panel of your TV,
push up the panel door just under
the
push up the panel door just under
the
mark.
5
4
– 4 –
KF-E42A10/E50A10
RM-GA004
Projection Lamp
Your TV uses a projection lamp as its light source. As
with any lamp, it has lifespan and needs to be replaced
when the Lamp indicator flashes or the screen
becomes darker.
with any lamp, it has lifespan and needs to be replaced
when the Lamp indicator flashes or the screen
becomes darker.
Notes
After turning on your TV, it may take a while (1 minute or
less) before the picture appears.
When the projection lamp wears out, the screen goes dark.
Replace the lamp with a new Sony XL-2400 replacement
lamp (not supplied). How to replace the lamp, see page 5.
less) before the picture appears.
When the projection lamp wears out, the screen goes dark.
Replace the lamp with a new Sony XL-2400 replacement
lamp (not supplied). How to replace the lamp, see page 5.
Warning
The light emitted from the lamp is quite bright when your TV
is in use. To avoid eye discomfort or injury, do not look into
the light housing when the power is on.
is in use. To avoid eye discomfort or injury, do not look into
the light housing when the power is on.
