Read Sony KDL-40X3000 / KDL-46X3000 Service Manual online
- 16 -
FIX2
RM-ED010
Service adjustments to this model can be performed using the
supplied remote Commander RM-ED010.
supplied remote Commander RM-ED010.
3.
The TVM menu appears on the screen (See Pic.1).
Note :
•
After carrying out the service adjustments, to prevent the
customer accessing the ‘Service Menu’ switch the TV set OFF
and then ON.
customer accessing the ‘Service Menu’ switch the TV set OFF
and then ON.
1.
Turn on the power to the TV set and enter into the stand-by
mode.
mode.
2.
Press the following sequence of buttons on the Remote
Commander.
Commander.
SECTION 3
ADJUSTMENTS
3-1. How to enter Service Mode
i+
5
+
(ON SCREEN (DIGIT 5) (VOLUME +) (TV)
DISPLAY)
DISPLAY)
I/
TV
Pic.1
3-2. Changing TVM Data Settings
1.
Press “2 / 5” on the remote commander to select (up / down)
category (See Pic.2).
category (See Pic.2).
2.
Press “1 / 4” on the remote commander to select (up / down)
item (See Pic.2).
item (See Pic.2).
3.
Press “3 / 6” on the remote commander to select (up / down)
data (See Pic.2).
data (See Pic.2).
Pic.2
3-3. Writing TVM Data
1.
Press “Mute” on the remote commander. The word “SERVICE”
in green changes to “WRITE” (See Pic.3).
in green changes to “WRITE” (See Pic.3).
2.
Press “0” on the remote commander. The word “WRITE” in
green changes to red (See Pic.3). This indicates writing is in
progess.
green changes to red (See Pic.3). This indicates writing is in
progess.
3.
After approximately 1 minute, red “WRITE” changes to green
“SERVICE”. This indicates writing is complete.
“SERVICE”. This indicates writing is complete.
Pic.3
3-4. Entering BEM Service Menu
1.
Press “Previous channel ” on the remote commander and the
BEM menu appears (See Pic.4)
BEM menu appears (See Pic.4)
Pic.4
3-5. Changing BEM Data Settings
1.
Press “2 / 5” on the remote commander to select (up / down)
category (See Pic.5).
category (See Pic.5).
2.
Press “1 / 4” on the remote commander to select (up / down)
item (See Pic.5).
item (See Pic.5).
3.
Press “3 / 6” on the remote commander to select (up / down)
data (See Pic.5).
data (See Pic.5).
Pic.5
Data
Item
Category
Data
Item
Category
Click on the first or last page to see other KDL-40X3000 / KDL-46X3000 service manuals if exist.