Read Sony KDL-32EX715 / KDL-40EX715 / KDL-46EX715 (serv.man3) Service Manual online
KDL-32EX715/40EX715/46EX715
14
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
151
X-2549-619-2
BEZEL (32) ASSEMBLY
(KDL-32EX715 ONLY)
151
X-2549-358-2
BEZEL (40) ASSEMBLY (FOR ARGENTINA)
(KDL-40EX715 ONLY)
151
X-2549-620-2
BEZEL (40) ASSEMBLY (FOR CHILE)
(KDL-40EX715 ONLY)
151
X-2549-359-2
BEZEL (46) ASSEMBLY (FOR ARGENTINA)
(KDL-46EX715 ONLY)
151
X-2549-617-2
BEZEL (46) ASSEMBLY (FOR CHILE)
(KDL-46EX715 ONLY)
152
A-1736-860-A
HMS2 BOARD, MOUNTED (FOR CHILE)
152
A-1789-964-A
HMS2 BOARD, MOUNTED (FOR ARGENTINA)
153
1-856-068-11
LENS
154
NA
LCD PANEL
FOR ALL LCD PANEL PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
155
4-166-286-21
BRACKET, SIDE JACK
156
A-1763-464-C
BAL BOARD, COMPLETE
NOTE: For BAL Board replacement, please refer to section
2-2. Adjustments after Replacing the BAL Board or LCD Panel.
NOTE: Final software is not installed on this BAL Board.
Install the update after replacing this board using the instructions
provided with the software.
157
1-474-250-11
GE3C(POWER) BOARD, COMPLETE
(KDL-32EX715 ONLY)
157
1-474-213-11
GE3A (POWER) BOARD, COMPLETE
(FOR ALL EXCEPT KDL-32EX715 ONLY)
2-580-592-01
SCREW, +PSW M3X8
1-4. GE3C/GE3A (POWER) BOARDS, BAL BOARD, HMS2 BOARD, LENS AND PANEL REMOVAL
A Remove 4 screws from GE3C/GE3A (Power) Boards
B Disconnect 6 connectors from GE3C/GE3A (Power) Boards
B Disconnect 6 connectors from GE3C/GE3A (Power) Boards
C Remove 4 screws from BAL Board
D Disconnect 5 connectors from BAL Board
D Disconnect 5 connectors from BAL Board
E Slide Side Jack Bracket to right-side to remove from BAL Board
F Slide Panel Brackets up, then out to detach from LCD Panel
4 from KDL-32EX715/40EX715 Only
6 from KDL-46EX715 Only
G Disconnect 1 connector from HMS2 Board and lift up to detach from Bezel
H Release clips to detach Lens from HMS2 Board
I Carefully Lift up LCD Panel to remove from Bezel
157
156
155
153
152
154
151
B
D
E
H
G
I
F
F
A
C
Click on the first or last page to see other KDL-32EX715 / KDL-40EX715 / KDL-46EX715 (serv.man3) service manuals if exist.