Read Sony VPL-HS51A / VPL-HS60 Service Manual online
1-9
VPL-HS60/HS51A
7.
Remove the shield plate (BD) in the direction shown
by the arrow.
by the arrow.
8.
Remove the shield plate (BU) in the direction shown
by the arrow.
by the arrow.
9.
Remove the four hooks of the holder (BD), then
remove the holder (BU) and lamp power supply board.
remove the holder (BU) and lamp power supply board.
10. Disconnect the harness from the connector on the lamp
power supply board.
Installation
11. Install the lamp power supply board in the reverse
11. Install the lamp power supply board in the reverse
order of steps 5 to 10.
12. Assemble this unit in the reverse order of steps 1 to 4.
A
A
B
B
Shield plate (BD)
Shield plate (BU)
Hooks
Hook
Holder (BD)
Holder (BU)
Harness
Lamp power supply
board
board
1-4-7. F Board
Removal
1.
1.
Remove the cabinet. (Refer to Section 1-3.)
2.
Disconnect the five harnesses from the connector
(CN10 to CN14) on the F board.
(CN10 to CN14) on the F board.
3.
Remove the two screws, then remove the F board.
Installation
4.
4.
Install the F board in the reverse order of steps 2 and 3.
5.
Attach the cabinet.
BTP
3
3
x 12
CN13
CN12
CN11
CN14
CN10
F board (Side A)
F board
Harnesses
Harnesses
Click on the first or last page to see other VPL-HS51A / VPL-HS60 service manuals if exist.