Read Sony VPL-HS51A / VPL-HS60 Service Manual online
1-4
VPL-HS60/HS51A
1-4. Replacing the Board
1-4-1. C Board
Removal
1.
1.
Remove the base assembly. (Refer to Section 1-3-1.)
2.
Remove the rear cover and connector panel assembly.
(Refer to steps 2 to 4 of Section 1-3-3.)
(Refer to steps 2 to 4 of Section 1-3-3.)
3.
Remove the four screws and disconnect the harness
from the connector (CN14) on the F board.
from the connector (CN14) on the F board.
4.
Remove the shield plate (CU).
5.
Disconnect all harnesses and flexible flat cables from
the connectors on the C board, then remove the C
board.
the connectors on the C board, then remove the C
board.
6.
Remove the shield plate (CD) from the C board.
8.
Disconnect the harness from the connector (CN201)
on the C board.
on the C board.
9.
Remove the filter assembly.
10. Remove the rear panel.
Installation
11. Attach the rear cover and the rear panel in the reverse
11. Attach the rear cover and the rear panel in the reverse
order of steps 2 to 10.
12. Attach the base assembly.
C board
CN201
Rear panel
Filter assembly
Harness
Click on the first or last page to see other VPL-HS51A / VPL-HS60 service manuals if exist.