Read Sony VPL-HS51A / VPL-HS60 Service Manual online
1-11
VPL-HS60/HS51A
1-4-9. Q Board (VPL-HS51A)
Removal
1.
1.
Remove the base assembly. (Refer to Section 1-3-1.)
2.
Remove the front panel (D) assembly.
(Refer to steps 2 to 4 of Removal (VPL-HS51A) in
Section 1-3-2.)
(Refer to steps 2 to 4 of Removal (VPL-HS51A) in
Section 1-3-2.)
3.
Remove the two screws, then remove the Q board.
4.
Disconnect the harness from the connector (CN5002)
on the Q board.
on the Q board.
Installation
5.
5.
Install the Q board in the reverse order of steps 3, 4.
6.
Assemble this unit in the reverse order of steps 1 and 2.
Shield plate
(ED)
(ED)
PSW
3
3
x 8
Shield plate (EU)
Q board
Harness
CN5002
DC fan
(for GA/GB unit)
(for GA/GB unit)
BTP
3
3
x 12
BTP
3
3
x 12
Fan holder (G)
1-5. Replacing the Main Parts
1-5-1. DC Fan (for GA/GB unit)
Removal
1.
1.
Remove the cabinet. (Refer to Section 1-3.)
2.
Remove the C board.
(Refer to steps 3 to 7 of Section 1-4-1.)
(Refer to steps 3 to 7 of Section 1-4-1.)
3.
Remove the lamp assembly.
(Refer to steps 2 and 3 of Section 1-5-2.)
(Refer to steps 2 and 3 of Section 1-5-2.)
4.
Remove the optical block assembly.
(Refer to step 5 of Section 1-5-3.)
(Refer to step 5 of Section 1-5-3.)
5.
Remove the lamp house.
(Refer to step 5 of Section 1-4-6.)
(Refer to step 5 of Section 1-4-6.)
6.
Remove the duct lamp assembly.
(Refer to step 6 of Section 1-4-8.)
(Refer to step 6 of Section 1-4-8.)
7.
Remove the two screws, then remove the fan holder (G).
8.
Remove the two screws, then remove the DC fan (for
GA/GB unit).
GA/GB unit).
Installation
9.
9.
Attach the DC fan (for GA/GB unit) in the reverse
order of steps 7 and 8.
order of steps 7 and 8.
10. Assemble this unit in the reverse order of steps 1 to 6.
Click on the first or last page to see other VPL-HS51A / VPL-HS60 service manuals if exist.