Read Sony DPP-FP60 / DPP-FP60BT Service Manual online
4-6
DPP-FP60/FP60BT
7.
When the Memory Stick reading and the SD card reading are
completed, pres the [ENTER] button.
completed, pres the [ENTER] button.
• When a Memory Stick and an SD card work normally so
that images can be read without error, the character OK is
displayed on the right of “Card Test” on the service mode
startup screen.
displayed on the right of “Card Test” on the service mode
startup screen.
• If a Memory Stick or an SD card is not set, or if image is not
contained in a Memory Stick and an SD card, or image cannot
be read from a Memory Stick and an SD card, background
of the screen becomes red and the character NG (No Good)
is displayed in the left bottom of a screen.
be read from a Memory Stick and an SD card, background
of the screen becomes red and the character NG (No Good)
is displayed in the left bottom of a screen.
4-3-3. IMAGE READING CHECK FROM MEMORY
STICK/SD CARD
Image reading from Memory Stick and SD card can be checked.
Preparation:
Place the JPEG file in the root directory of a Memory Stick.
(Filename: MS.jpg)
Place the JPEG file in the root directory of an SD card. (Filename:
SD.jpg)
(Filename: MS.jpg)
Place the JPEG file in the root directory of an SD card. (Filename:
SD.jpg)
Procedure:
1.
Start the service mode. (Refer to Section 4-1-1.)
2.
Select “Card Test” by using the arrow buttons (f, F).
3.
Insert a Memory Stick that is prepared separately, and press
the [G] button.
the [G] button.
4.
Confirm that the MS.jpg image is displayed.
5.
Remove the Memory Stick, and insert an SD card that is
prepared separately.
prepared separately.
6.
Press the [F] button and confirm that the SD.jpg image is
displayed.
displayed.
When the checks of all buttons are completed without problem, the
initial screen of the service mode is displayed and “OK” is displayed
to the right of “Button Test”.
initial screen of the service mode is displayed and “OK” is displayed
to the right of “Button Test”.
3.
Quit the service mode. (Refer to Section 4-1-1.)
LED operation check
Check that the “PRINT LED” and the “Access LED” light up during
the “Button Test”, and then flash before turning off when the “Button
Test” is completed.
the “Button Test”, and then flash before turning off when the “Button
Test” is completed.
Ribbon sensor operation check
Whether the ribbons are correctly recognized or not can be checked.
Check to see that the ribbon type display on the screen agrees with
the inserted ribbon when different types of ribbon are inserted.
Check to see that the ribbon type display on the screen agrees with
the inserted ribbon when different types of ribbon are inserted.
Print Pack Size
Display
Postcard size
Post
L size
L
Not installed
None
Tray sensor operation check
Whether the trays are correctly recognized or not can be checked.
Check to see that the tray type displayed on the screen agrees with
the inserted tray when different types of tray are inserted.
Check to see that the tray type displayed on the screen agrees with
the inserted tray when different types of tray are inserted.
Print Pack Size
Display
Postcard size
Post
L size
L
Not installed
None
Click on the first or last page to see other DPP-FP60 / DPP-FP60BT service manuals if exist.