DPP-FP60, DPP-FP60BT - Sony Other Service Manuals Service Manual (repair manual). Page 25

4-8E

DPP-FP60/FP60BT

The mechanical check is performed in the service mode.

1.

Start the service mode. (Refer to Section 4-1-1.)

2.

Select “Mechanical Test” using the arrow buttons
(f,F)  and press the [ENTER] button. The following menu
screen is displayed.

3.

Press the [CANCEL] button on this Menu screen to return to
the startup screen of the service mode while any test mode is
running, except when the head motor aging or the paper feed
motor aging is running.

4.

When the mechanical operation check is complete, quit the
service mode. (Refer to Section 4-1-1.)

Each operation of this unit is performed when the button on the
operation panel is pressed.

: Do not press the button that is not described below.

• [ENTER] button:

The head position returns to the initial state when this button is
pressed.

• f button:

The head position moves upward when this button is pressed.

• F button:

The head position moves downward when this button is pressed.

• [MENU] button:

The head motor aging starts when this button is pressed. When
the [CANCEL] button is pressed during aging, the operation is
discontinued.

• [PRINT] button:

The electric current of head motor is switched when this button
is pressed. The electric current is switched as follows every time
the button is pressed.
Electric current H 

t Electric current M t Electric current L

(repeated)

• G button:

The paper feed motor moves in the paper feed direction when
this button is pressed.The speed changes every time this button is
pressed.
(Low speed L 

t Middle speed M t High speed H t Stop

Stp)

• g button:

The paper feed motor moves in the paper eject direction when
this button is pressed. The speed changes every time this button
is pressed.
(Low speed L 

t Middle speed M t High speed H t Stop

Stp)

•

 (Enlarge) button:

The paper feed motor aging starts when this button is pressed.
When the [CANCEL] button is pressed during aging, the operation
is discontinued.

•

 (Reduce) button:

The electric current of paper feed motor is switched when button
is pressed. The electric current is switched as follows every time
the button is pressed.
Electric current H 

t Electric current M2 t Electric current

M1 

t Electric current L (repeated)

To quit each operation, press the [CANCEL] button.

The screen returns to the menu screen.

HeatStrage Error: Heat storage correction error
Other Error:

Other error

Unknown:

Unknown

M Status:

Not used

Pass:

Print pass

Feed:

During paper feeding

Y:

During yellow printing

M:

During magenta printing

C:

During cyan printing

Lami:

During laminated paper printing

Unknown:

Unknown

Total Try:

Total count of tried printing

Total Print:

Total count of printing

Set Count:

User setting count (1 or 0)

Left Count:

Remaining print count (1 or 0)

Progress:

Progress (%) of each color (Y, M, C, L) during
printing

Thermistor:

Thermistor value of head

Sensor:

Each sensor value (1 or 0)
R2
R1
R0
RM
T1
T0
PE
CF_VS

Cool down:

Cool down (Decrease the heat temperature)

Paper Sup:

Paper feed

Paper Rev1:

Paper reverse 1
(Reverse paper to the point of PE paper feed
by determining the paper length.)

Paper Rev2:

Paper reverse 2
(Reverse paper after single color printing)

Paper Init0:

Paper initial point 0

Paper Init1:

Paper initial point 1

Print:

Printing

Paper Eject1:

Paper eject 1
(Paper eject at the completion of printing)

Paper Error Eject0: Error paper eject 0
Paper Error Eject1: Error paper eject 1
Timeout M0/1:

Return to M0 or M1

Unknown:

Unknown

Mode Pos:

Head position
PR
RS
PF
PU
RL

Unknown:

Unknown