Read Sony DPP-EX50 Service Manual online
4-4
DPP-EX50 V1
Pass:
Print pass
Feed:
Feed:
During paper feeding
Y:
During yellow printing
M:
During magenta printing
C:
During cyan printing
Lami:
During laminate printing
Unknown:
Not known
Total Try:
Total count of tried printing
Total Print:
Total count of printing
Thermistor:
Thermistor value of thermal head
Set Count:
User setting count (1 or 0)
Left Count:
Remaining printing count (1 or 0)
Progress:
Progress (%) of each color (Y. M. C and L) during printing
Sensor:
Each sensor value (1 or 0)
MD detail:
Details of mechanical deck state
Idle:
Idle state
Ribbon Init1:
Ribbon initial point 1 (Detection of the first ribbon mark of Y)
Ribbon Init2:
Ribbon initial point 2 (Detection of ribbon mark other than Y)
Ribbon Init3:
Ribbon initial point 3 (Halfway of ribbon)
Ribbon Init4:
Ribbon initial point 4 (Detection of the second ribbon mark of Y)
Preheat:
Preheat (Increasing thermal head temperature)
Cooldown:
Cool down (Decreasing thermal head temperature)
Paper Sup:
Paper feeding
Paper Rev1:
Paper reverse 1(After paper feeding, reverse the paper to the point
of paper end while determining the paper length.)
of paper end while determining the paper length.)
Paper Rev2:
Paper reverse 2 (Reverse paper after single color printing)
Paper Int0:
Paper initial point 0
Paper Int1:
Paper initial point 1
Print:
Printing
Paper Eject1:
Paper eject 1 (Paper eject at the completion of printing)
Paper Error Eject0:
Paper error eject 0
Paper Error Eject1:
Paper error eject 1
Timeout M0/1:
Return to M0 or M1
Unknown:
Not known
Mode Pos:
Thermal head position
M0
M0
M0.2
M0.3
M0.3
M0.5
M1
M1
M2
M2.4
M2.4
M3
M3.1
M3.1
M3.2
M4
M4
M5
Unknown:
Unknown:
Not known
Click on the first or last page to see other DPP-EX50 service manuals if exist.