Read Sony DPP-EX50 Service Manual online
2-5
DPP-EX50 V1
Paper guide assembly
K frame assembly
Hook [A]
Hook [A]
Hook [A]
Hook [A]
A
A
B
RM-46 board
K frame assembly
Hook [B]
Harness
CN841
Hook [B]
RM-46 board
14. Install the RM-46 board in the reverse order of steps 1
to 13.
12. Install the PE-46 board in the reverse order of steps 1
to 11.
2-1-8. RM-46 Board
n
When removing/installing the RM-46 board, be careful not
When removing/installing the RM-46 board, be careful not
to break the two hooks [B].
1.
Remove the front door assembly. (Refer to Section 1-2-1.)
2.
Remove the ribbon door. (Refer to Section 1-2-2.)
3.
Remove the cabinet (L) assembly. (Refer to Section 1-2-3.)
4.
Remove the FT panel assembly. (Refer to Section 1-2-4.)
5.
Remove the ferrite holder. (Refer to Section 2-8.)
6.
Remove the DK-46 board. (Refer to Section 2-1-3.)
7.
Remove the paper eject guide assembly. (Refer to
Section 2-3.)
Section 2-3.)
8.
Remove the F chassis assembly. (Refer to Section 2-4.)
9.
Remove the MD-46 board. (Refer to Section 2-1-5.)
10. Remove the K frame assembly. (Refer to Section 2-5.)
11. Remove the four hooks [A], then remove the paper
11. Remove the four hooks [A], then remove the paper
guide assembly from the K frame assembly.
12. Disconnect the harness from the connector (CN841)
on the RM-46 board.
13. Remove the two hooks [B] of the K frame assembly in
the direction shown by the arrow A, then remove the
RM-46 board in the direction shown by the arrow B.
RM-46 board in the direction shown by the arrow B.
Click on the first or last page to see other DPP-EX50 service manuals if exist.