DPF-V800, DPF-X800 - Sony Other Service Manuals Service Manual (repair manual). Page 3

– 3 –

DPF-V800/X800

The Sony DPF-V800/X800 is a digital photo frame for easily dis-
playing images taken with a digital camera or other device with-
out using a computer.

 Support for various memory cards*

Supports various memory cards and other devices, such as a
“Memory Stick”, CompactFlash card, SD memory card, xD-
Picture Card, and USB memory. Just insert a memory card
removed from a digital camera or other device, and you will
be able to view the images immediately.

 Various display functions

You can enjoy various viewing modes, such as the slideshow
display, Clock and calendar display, Single view mode, and
Index image display.

 Various modes

The displayed image can be switched automatically as though
you are turning the pages of an album yourself. You can select
from various modes, including just images, a clock, or calen-
dar view. You can also change playback settings such as the
playback order.

 Adding images to internal memory

The images you add to the album are saved in internal memory.

 Exporting images

You can export images in the album to your memory card.

 CreativeEdit function

You can create original images using the “Scrapbook,” “Cal-
endar setting,” “Frame” or “Superimpose/Stamp” features.

 Search function

You can search for images by event, folder, image direction,
and mark.

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.

 Auto Touch-up features

You can enjoy beautiful images enhanced by automatic cor-
rections of backlight, focus, red-eye, skin smoothing, and white
balance.

 Alarm function

The photo frame announces the specified time on the image
and using sound.

 Automatic rotation of images

The photo frame automatically rotates images to their proper
orientation. Images are also automatically rotated when the
photo frame is set in either the portrait or landscape position.

 Connecting to a high definition TV to display images

on a large screen
Using the photo frame’s HDMI output connector, you can en-
joy the images stored on a memory card, external device, or in
internal memory on a large screen, with accompanying music.

 Easy transfer of images taken with a Bluetooth

compatible mobile phone or other device*
You can transfer images to the photo frame’s internal memory
from a Bluetooth compatible device via a Bluetooth adaptor
(optional).

 Automatic brightness sensor

The photo frame is associated with indoor brightness and ad-
justs the illumination automatically.

 Displaying images on a wall

You can hang the photo frame on the wall.

* We do not guarantee proper operations for all types of devices.

1. Check the area of your repair for unsoldered or poorly-sol-

dered connections.  Check the entire board surface for solder
splashes and bridges.

2. Check the interboard wiring to ensure that no wires are

“pinched” or contact high-wattage resistors.

3. Look for unauthorized replacement parts, particularly transis-

tors, that were installed during a previous repair.  Point them
out to the customer and recommend their replacement.

4. Look for parts which, through functioning, show obvious signs

of deterioration.  Point them out to the customer and recom-
mend their replacement.

5. Check the B+ voltage to see it is at the values specified.
6. Flexible Circuit Board Repairing

• Keep the temperature of the soldering iron around 270˚C dur-

ing repairing.

• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).

• Be careful not to apply force on the conductor when solder-

ing or unsoldering.

Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40

°C higher than

ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350

°C.

Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!

• Strong viscosity

Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur
such as on IC pins, etc.

• Usable with ordinary solder

It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.

Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)

CAUTION

Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.

The changed portions from
Ver. 1.2 are shown in blue.