Read Sony HDR-XR500 / HDR-XR500E / HDR-XR500V / HDR-XR500VE / HDR-XR520 / HDR-XR520E / HDR-XR520V / HDR-XR520VE (serv.man2) Service Manual online
1-1
ENGLISH
JAPANESE
ENGLISH
JAPANESE
HDR-XR500/XR500E/XR500V/XR500VE/
XR520/XR520E/XR520V/XR520VE_L2
XR520/XR520E/XR520V/XR520VE_L2
1. SERVICE NOTE
1-1. POWER SUPPLY DURING REPAIRS
In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4V), the power is shut off so
that the unit cannot operate.
These following method is available to prevent this.
that the unit cannot operate.
These following method is available to prevent this.
Method:
Use the AC power adaptor (AC-L200C/L200D).
1-2. PRECAUTION ON REPLACING THE VC-557 BOARD
DESTINATION DATA
When you replace to the repairing board, the written destination data of repairing board also might be changed to original setting.
Start the Adjust Manual in the Adjust Station and execute the “DESTINATON DATA WRITE”.
Start the Adjust Manual in the Adjust Station and execute the “DESTINATON DATA WRITE”.
RESTORE DATA
When you replace to the repairing board, get the data from the former one.
Start the Adjust Manual in the Adjust Station and perform “RESTORE DATA” to get the data.
The data getting for this model is as follows.
Start the Adjust Manual in the Adjust Station and perform “RESTORE DATA” to get the data.
The data getting for this model is as follows.
• USB SERIAL No.
USB SERIAL No.
The set is shipped with a unique ID (USB Serial No.) written in it.
This ID has not been written in a new board for service, and therefore it must be entered after the board replacement.
Start the Adjust Manual in the Adjust Station and execute the “USB SERIAL No. INPUT”.
This ID has not been written in a new board for service, and therefore it must be entered after the board replacement.
Start the Adjust Manual in the Adjust Station and execute the “USB SERIAL No. INPUT”.
1-3. USING SERVICE JIG
Connect the extension cables between MD-143 board and VC-557 board.
VC-557 BOARD (SIDE B)
80
2
84
82
79
1
83
81
80
2
84
82
79
1
83
81
CN1006
CN1007
MD-143 BOARD (SIDE A)
80
2
84
82
79
1
83
81
82
81
2
80
1
79
CN4002
CN4003
J-6082-715-A:
EXTENSION CABLE (P AND R) 80P
(Instead of FP-1035 flexible board)
EXTENSION CABLE (P AND R) 80P
(Instead of FP-1035 flexible board)
J-6082-714-A:
EXTENSION CABLE (P AND P) 80P
(Instead of FP-1034 flexible board)
EXTENSION CABLE (P AND P) 80P
(Instead of FP-1034 flexible board)
Click on the first or last page to see other HDR-XR500 / HDR-XR500E / HDR-XR500V / HDR-XR500VE / HDR-XR520 / HDR-XR520E / HDR-XR520V / HDR-XR520VE (serv.man2) service manuals if exist.